Mains PYQs
UPSC Mains Statistics paper 2 2025 questions
- State the significance of operating characteristic (OC) curves in control chart analysis. Obtain the general expression for the OC function corresponding to the mean ($\bar{X}$) chart under the assumption of normal distribution for a quality characteristic. Using the expression, find the probability that a shift will be detected from $\mu_0$ to $\mu_1 = \mu_0 + 2\sigma$, when an $\bar{X}$ chart is used with $3\sigma$ limits, where the subgroup size is $n = 6$. (Standard normal table is provided.)
- What is meant by rectifying inspection? Explain the measures associated with rectifying inspection and derive the expressions of such measures in the case of a single sampling plan by attributes.
- The lifetime of a semiconductor laser has a log-normal distribution with parameters $\mu = 10$ hours and $\sigma = 1.5$ hours.
(i) Find the probability that the lifetime exceeds 10000 hours. [5]
(ii) What lifetime is exceeded by 99% of lasers? [5]
(Standard normal table is provided.)
- A stockist has to supply 400 units of a product every Monday to his customers. He gets the product at ₹ 50 per unit from the manufacturer. The cost of ordering and transportation from the manufacturer is ₹ 75 per order. The cost of carrying inventory is 7.5% per year of the cost of the product. Find (i) the economic lot size, (ii) the total optimal cost (including the capital cost) and (iii) the total weekly profit, if the item is sold for ₹ 55 per unit.
- On the average, 96 patients per 24-hour day require the service of an emergency clinic. Also, on the average, a patient requires 10 minutes of active attention. Assume that the facility can handle only one emergency at a time. Suppose that it costs the clinic ₹ 1,000 per patient treated to obtain an average serving time of 10 minutes, and that each minute of decrease in this average time would cost the clinic ₹ 100 per patient treated. How much would have to be budgeted by the clinic to decrease the average size of the queue from $1\frac{1}{3}$ patients to $\frac{1}{2}$ patient?
- (i) What are control charts by variables and control charts by attributes? [5]
(ii) Derive the control limits for the construction of control charts for the mean and variability based on sample standard deviation. [15]
- (i) State the assumptions involved under sampling inspection plans by variables and describe the operating procedure of a single sampling plan by variables under the assumption of normal distribution for a quality characteristic. [5]
(ii) Establish the relationship between the fraction defective and the acceptance probability under a single sampling plan by variables when the quality characteristic follows a normal distribution with mean $\mu$ and variance $\sigma^2$, where $\sigma^2$ is unknown, and when an upper specification limit is specified. Using the relationship, obtain the formula for finding the parameters of the sampling plan. [10]
- (i) Given a system consisting of $n$ components, define the state vector and the structure function of the system. What do they indicate? [5]
(ii) Defining (1) a series system, (2) a parallel system and (3) a $k$-out-of-$n$ system, obtain the associated expressions for the structure functions and the reliability functions. [10]
- A company manufactures 30 items per day. The sale of those items depends upon demand which has the following distribution :
| Sale (units) | 27 | 28 | 29 | 30 | 31 | 32 |
|---|---|---|---|---|---|---|
| Probability | 0.10 | 0.15 | 0.20 | 0.35 | 0.15 | 0.05 |
The production cost and selling price of each unit are ₹ 400 and ₹ 500 respectively. Any unsold product is to be disposed off at a loss of ₹ 150 per unit. There is a penalty of ₹ 50 per unit if the demand is not met.
Use the following random numbers to estimate total profit/loss for the company for the next 10 days :
23, 99, 65, 99, 95, 01, 79, 11, 16, 10
If the company decides to produce 20 items per day, what is the advantage or disadvantage to the company?
- A company has four plants $P_1$, $P_2$, $P_3$ and $P_4$ from which it supplies to three markets $M_1$, $M_2$ and $M_3$. Determine the optimal transportation plan from the following data giving the plant to market shifting costs, quantities available at each plant and quantities required at each market :
| Market | $P_1$ | $P_2$ | $P_3$ | $P_4$ | Required at market |
|---|---|---|---|---|---|
| $M_1$ | 19 | 14 | 23 | 11 | 11 |
| $M_2$ | 15 | 16 | 12 | 21 | 13 |
| $M_3$ | 30 | 25 | 16 | 39 | 19 |
| Available at plant | 6 | 10 | 12 | 15 | 43 |
- On January 1 (this year), brands $A$, $B$ and $C$ of a commodity had 40, 40 and 20 percent of the market share. Basing upon a market research, it is compiled that brand $A$ retains 90 percent of its customers, while gaining 5 percent of $B$'s customers and 10 percent of $C$'s customers. Brand $B$ retains 85 percent of its customers, while gaining 5 percent of $A$'s customers and 7 percent of $C$'s customers. Brand $C$ retains 83 percent of its customers and gains 5 percent of $A$'s customers and 10 percent of $B$'s customers. What will be each brand's share on January 1 (next year) and what will be each brand's share in the market at equilibrium?
- Solve the game whose payoff matrix is
$$\begin{bmatrix} -1 & -2 & 8 \\ 7 & 5 & -1 \\ 6 & 0 & 12 \end{bmatrix}$$
- Use the penalty (Big M) method to solve the following linear programming problem :
Minimize $Z = 5x_1 + 3x_2$
subject to the constraints
$2x_1 + 4x_2 \leq 12$
$2x_1 + 2x_2 = 10$
$5x_1 + 2x_2 \geq 10$
$x_1, x_2 \geq 0$
- (i) Distinguish between a nonconforming unit and a nonconformity. State the appropriate conditions for constructing a control chart for nonconformities and derive the control limits for a control chart based on the average number of nonconformities per inspection unit. [10]
(ii) Describe the operating procedure of unit-by-unit sequential sampling plan by attributes. What is the unique feature of a sequential sampling plan? [5]
(iii) The time to failure for an electronic component used in a flat panel display unit is satisfactorily modelled by a Weibull distribution with the shape parameter $\beta = \frac{1}{2}$ and the scale parameter $\theta = 5000$ hours. Find the mean time to failure and the fraction of component that is expected to survive beyond 20000 hours. [5]
- Explain the multicollinearity problem in a regression model. What are its consequences? State the different indicators of multicollinearity and explain.
- Establish the relationship among crude birthrate, general fertility rate and total fertility rate in the context of continuous data. Also, mention the properties of these fertility rates.
- What are the implications of using stable versus quasi-stable population assumption in demographic modelling?
- Discuss the problem of heteroscedasticity. Given that $Y_i = \alpha + \beta X_i + U_i$ with $E(U_i^2) = K^2 X_i^2$, prove that OLS estimates of $\alpha$ and $\beta$ possess greater variance than OLS estimates of the transformed version of original model.
- What does it imply by validity of a test? Distinguish between the concepts of validity and reliability.
- On the basis of the figures given below, calculate the age-specific death rates (ASDRs) for all the age groups. Also, calculate the crude death rate (CDR) on the basis of ASDRs :
| Age group (in years) | 0-10 | 10-30 | 30-50 | 50-70 | 70 and above |
|---|---|---|---|---|---|
| Population | 10000 | 18000 | 26000 | 20000 | 5000 |
| Number of deaths | 220 | 40 | 62 | 350 | 2000 |
It was later discovered that two individuals, aged 47 and 54, were incorrectly recorded as being 37 and 45, while compiling the above table. Recalculate the ASDRs and CDR based on the corrected age data. (All calculations are up to 3 decimals only.)
- Discuss the problem of identification with an example. State the rank and order conditions of identification. Check the identifiability of the following structural model :
$y_1 = \alpha_1 + \beta_{12} y_2 + \beta_{13} y_3 + \gamma_{11} x_1 + \gamma_{12} x_2 + u_1$
$y_2 = \alpha_2 + \beta_{23} y_3 + \gamma_{21} x_1 + \gamma_{22} x_2 + u_2$
$y_3 = \alpha_3 + \beta_{31} y_1 + \gamma_{31} x_1 + \gamma_{32} x_2 + u_3$
$y_4 = \beta_{41} y_1 + \beta_{42} y_2 + \beta_{43} x_3 + u_4$
- Prepare a life table for an age group from age 50 to age 60 of a specific population. Assume that there are 10000 persons living at age 50 and the probability of death within age $x$ to $x+1$ is given as $q_x = 0.001 + 0.0002x$; $x = 50, 51, \ldots, 60$. Prepare the life table with columns $x$, $l_x$, $q_x$, $d_x$ and $L_x$ for $x = 50, 51, 52, \ldots, 60$.
- Explain the concept of index number. Calculate the Fisher's ideal index number from the following data and verify that whether it satisfies time reversal and factor reversal tests :
| Commodity | $p_0$ (2006) | $q_0$ (2006) | $p_1$ (2007) | $q_1$ (2007) |
|---|---|---|---|---|
| A | 10 | 40 | 12 | 45 |
| B | 11 | 50 | 11 | 52 |
| C | 14 | 30 | 17 | 30 |
| D | 8 | 28 | 10 | 29 |
| E | 12 | 15 | 13 | 20 |
- The population growth of a city is modelled using logistic growth model with a carrying capacity of $K = 10000000$. The population data (in thousands) is provided at 2-year intervals from 2014 (taken as $t = 0$) to 2024 ($t = 10$) :
| Year ($t$) | 0 | 2 | 4 | 6 | 8 | 10 |
|---|---|---|---|---|---|---|
| Population $P(t)$ (in 1000s) | 1000 | 1785 | 2575 | 3400 | 4900 | 6200 |
(i) Estimate the two parameters of the logistic growth model. [16]
(ii) Using the estimated model, project the population of the city for the year 2026. [4]
- Discuss the agricultural statistics relating to area and yield in our country. Also, point out the need and importance of agricultural statistics.
- Define time series. For a moving-average process with weights $\{a_1, a_2, \ldots, a_m\}$ of random components $\{e_i,\ i = 1, 2, \ldots\}$, where $e_i$'s are i.i.d. $N(0, \sigma^2)$, obtain the correlogram function. Find its form, when all the weights are equal and their sum is 1.
- The marks obtained by student $A$ in Mathematics and Language tests of maximum marks 150 each are 120 and 105 respectively. Find out in which subject, student $A$ is more able as compared to other students based on the measure of $T$ score. The following table gives a sample of marks obtained by 15 students of the same class :
| Score in Mathematics | Score in Language |
|---|---|
| 100 | 67 |
| 75 | 63 |
| 88 | 73 |
| 85 | 77 |
| 92 | 60 |
| 94 | 53 |
| 93 | 50 |
| 84 | 48 |
| 67 | 38 |
| 96 | 73 |
| 100 | 36 |
| 102 | 45 |
| 94 | 47 |
| 73 | 39 |
| 83 | 56 |
- Describe the 2-stage least squares (2SLS) method of estimation of parameters in linear regression model. Also, state the assumptions and discuss its properties.