Mains PYQs
UPSC Mains Statistics paper 2 2024 questions
- Consider a system consisting of three identical units connected in parallel. The unit reliability factor is 0.90. If the unit failures are independent of one another, and if the successful operation of the system depends on the satisfactory performance of any one unit, determine the system's reliability.
- Describe the procedure and some of the applications of Cumulative Sum (CUSUM) chart for monitoring process mean.
- Explain the following terms as used in sampling inspection plans : [5]
(i) Producer's risk
(ii) Average Outgoing Quality Limit [5]
- A Linear Programming Problem (LPP) in standard form is as given below :
Optimize $Z = C^{T}X$
subject to $AX = B$
with $X \geq 0$
Write down the Dual Simplex form and its iterative procedure.
- What is Monte Carlo Simulation ? State the uses and applications of Monte Carlo Simulation.
- Obtain the control limits for $\bar{X}$-chart and R-chart and describe the significance of joint study of these charts.
- Find the reliability and hazard functions of Weibull distribution with scale parameter $\theta$ and shape parameter $\beta$, and interpret the findings.
- Use simplex method to solve the following LPP :
Maximize $z = 5x_1 + 2x_2$
subject to
$6x_1 + x_2 \geq 6$
$4x_1 + 3x_2 \geq 12$
$x_1 + 2x_2 \geq 4$
$x_1 \geq 0, x_2 \geq 0$
- With respect to a given Linear Programming Problem (LPP), explain the following concepts :
(i) Extreme Point Solutions
(ii) Duality Theorem
(iii) Complementary Slackness Principle
- Define a Transition Probability Matrix (TPM). When is it said to be Regular and Ergodic ? Check whether the following TPM is Regular or Ergodic. Hence or otherwise obtain the $\lim_{n \to \infty} P^n$, where
$$P = \begin{pmatrix} 0.88 & 0.12 \\ 0.15 & 0.85 \end{pmatrix}.$$
- The reliability function $R(t)$ of a cutting assembly is given by :
$$R(t) = \begin{cases} \left(1 - \dfrac{t}{t_0}\right)^2, & 0 \leq t \leq t_0 \\ 0, & t \geq t_0 \end{cases}$$
(i) Determine the failure rate. [8]
(ii) Does the failure rate increase or decrease with time ? [4]
(iii) Determine the mean time to failure. [8]
- A manually handled toll-booth has two tellers, who are each capable of handling an average of 60 vehicles per hour, with the actual service times exponentially distributed. Vehicles arrive at the booth according to a Poisson process, at an average rate of 100 per hour. Determine the following :
(i) The probability that there are more than three vehicles in the booth at the same time
(ii) The probability that a given teller is idle
(iii) The probability that a vehicle spends more than 3 minutes in the booth
- PQR Electronics produces 300 transistors per day, which go into the inventory. It supplies 150 transistors per day to XYZ Radios. The annual demand is 37,500 units. The inventory holding cost is \$ 0.25 per transistor per year and the setup cost per production run is \$ 200. Find the following :
(i) Economic Order Quantity (EOQ)
(ii) Production run length
(iii) Number of production runs per year
(iv) Maximum Inventory Level
- (i) Explain the terms 'chance causes' and 'assignable causes' of variation in quality control. Also provide some principal advantages of statistical quality control. [10]
(ii) Describe the procedure of obtaining OC curve for single sampling plan. [10]
- Discuss the Indian Statistical System. State some important organisations and explain the main working of the National Statistical Organisation (NSO).
- Consider AR(1) model with non-zero mean 74.3293 and $\phi = 0.5705$. If the last observed value is 67, then obtain the forecasting 1 time unit into the future yields. What is the forecasted value of 5 time units into the future ?
- Discuss the concept of structure and model for Simultaneous Linear Statistical Equations (SLSE) model. The application of least squares method for estimating the parameters in SLSE model is inappropriate. Explain.
- (i) Determine the average age at death of those who die between ages $x$ and $x + n$.
(ii) If $l(x) = 100\sqrt{100 - x}$ find $\mu(84)$ exactly using appropriate method.
- What are intelligence tests and how are they used in measuring intelligence ? Define the terms mental age and IQ in this connection.
- For the linear model $Y = X\beta + u$, obtain the expressions for Ordinary Least Squares (OLS) and Generalised Least Squares (GLS) estimators of the parameters. Discuss their properties and compare them.
- Explain Time Reversal Test, Factor Reversal Test and Circular Test in the Index Number Theory.
Using the following data, verify whether the Laspeyres' formula satisfies Time Reversal Test.
| Commodity | 1979 Price | 1979 Quantity | 1980 Price | 1980 Quantity |
|---|---|---|---|---|
| Rice | 32 | 50 | 30 | 50 |
| Barley | 30 | 35 | 25 | 40 |
| Maize | 16 | 55 | 18 | 50 |
- Distinguish between population estimates and population projections. Briefly describe the component method of population projection.
- Explain the problem of identification with a suitable example. Also discuss the conditions of identification. Check the identifiability of each equation of the following structural model :
$y_1 = 3y_2 - 2x_1 + x_2 + u_1$
$y_2 = y_3 + x_2 + u_2$
$y_3 = y_1 - y_2 - 2x_3 + u_3$
- Explain why mortality situations at two places cannot be compared on the basis of crude death rates. Describe the construction of standardised death rates for this purpose. What is a comparative mortality index and how is it used ?
- (i) Define reliability of a test. What is the effect of test length on the reliability of a test ? [5]
(ii) Give different methods for estimating the reliability of a psychological test. [10]
- Four items are to be constructed so that they are equispaced on the difficulty scale. If the easiest item is passed by 85% of the group and the most difficult by 25%, find the percentage of individuals in the group passing the other two items.
(Standard Normal tables are provided)
- Define Crude Birth Rate, General Fertility Rate and Age-specific Fertility Rate and indicate why each is considered an improvement on the preceding measure of fertility.
Define Total Fertility Rate and its utility.
- (i) Discuss the problem of autocorrelation. What are the consequences of OLS estimators in estimating the parameters in the presence of autocorrelation ? [10]
(ii) Explain the Durbin-Watson test for testing the autocorrelation. [10]