Mains PYQs
UPSC Mains Statistics paper 1 2021 questions
- A production unit manufacturing surgical masks is concerned about the quality of their masks. A random sample of n masks are inspected to estimate 'p', the probability of manufacturing a defective mask. How large a sample is required so that the estimate of p lies in the range $p \pm 0.1$ with probability 0.95?
- An insurance company studies a sample of 150 policy-holders. There are three categories of policies: auto, home and medical. The following results are obtained about the policies held by the policy-holders:
(i) 30 have only home insurance
(ii) 10 have only medical insurance
(iii) 98 have auto insurance, but not all three types of insurance
(iv) 27 have medical insurance, but not all three types of insurance
(v) 13 have auto and medical insurance
Given that a policy-holder has medical insurance, calculate the probability that he has home insurance.
- Let $X$ and $Y$ be independent and identically distributed exponential random variables with mean $\lambda > 0$.
Define
$$Z = \begin{cases} 1, & \text{if } X < Y \\ 0, & \text{if } X \geq Y \end{cases}$$
Find $E[X|Z=1] + E[X|Z=0]$.
- Let $X_1, X_2, \ldots, X_n$ be a random sample from
$$f(x,\theta) = \frac{\log(\theta)}{\theta - 1}\theta^x;\; 0 < x < 1,\; \theta > 1$$
Is there a function of $\theta$, say $g(\theta)$, for which there exists an unbiased estimator whose variance attains the C-R lower bound? If yes, find it. If not, show why not.
- Let $f(x,\theta)$ be the Cauchy pdf
$$f(x,\theta) = \frac{\theta}{\pi}\frac{1}{\theta^2 + x^2};\; -\infty < x < \infty,\; \theta > 0$$
(i) Show that this family does not have Monotone Likelihood Ratio (MLR). [5]
(ii) If $X$ is one observation from $f(x,\theta)$, show that $|X|$ is sufficient for $\theta$ and hence the distribution of $|X|$ does have an MLR. [5]
- Let $Y_1, Y_2, Y_3, \ldots$ be independent and identical Poisson random variables with parameter 1. Use central limit theorem to establish
$$n! \simeq \sqrt{2\pi n}\left(\frac{n}{e}\right)^n$$
for large value of positive integer $n$.
- Let $X_1, X_2, \ldots, X_n$ be a random sample such that $\log X_i \sim N(\theta, \theta)$ distribution with $\theta > 0$ unknown. Show that one of the solutions of the likelihood equation is the unique MLE of $\theta$. Obtain asymptotic distribution of MLE of $\theta$.
- (i) State the sufficient conditions for a function $\phi(t)$ to be a characteristic function. [5]
(ii) Investigate if the following functions are characteristic functions: [10]
1. $e^{-t^4}$
2. $[1 + |t|]^{-1}$
Justify your answer.
- Let $X$ and $Y$ be two independent random variables following exponential distribution with mean $\frac{1}{\lambda}$ and $\frac{1}{\mu}$ respectively, $\lambda > 0$, $\mu > 0$. Suppose that $(X_1, X_2, \ldots, X_n)$ and $(Y_1, Y_2, \ldots, Y_n)$ are sequences of observations on $X$ and $Y$ respectively.
A random variable $U_i$ is defined as
$$U_i = \begin{cases} 1, & \text{if } X_i \geq Y_i,\; i = 1, 2, \ldots, n \\ 0, & \text{otherwise} \end{cases}$$
Construct Wald's SPRT procedure based on $U_i$'s for testing $H: \lambda = \mu$ versus $K: \lambda = 2\mu$ with strength $(\alpha, \beta)$.
- Let $Y_i$, $i \geq 1$ be independent and identical $U(-1, 1)$ random variables. Determine if the following sequences converge in probability:
(i) $\left\{\frac{Y_i}{i}\right\}$ [5]
(ii) $\left\{(Y_i)^i\right\}$ [10]
- Let $X_1, X_2, \ldots, X_n$ be a random sample from uniform distribution $U(-\theta, \theta)$, $\theta > 0$. Find the complete sufficient statistic for $\theta$. Hence, obtain the best unbiased estimator of $\theta$.
- Let $X_1, X_2, \ldots, X_n$ be a random sample from Poisson distribution with mean $\lambda > 0$. Define a statistic
$$W = \left(1 - \frac{1}{n}\right)^T,\quad T = \sum_{i=1}^{n} X_i$$
(i) Show that $T$ is complete sufficient statistic.
(ii) Show that $T$ is unbiased for $e^{-\lambda}$.
(iii) Show that even though $T$ is UMVUE, it does not attain the CRLB for $g(\lambda) = e^{-\lambda}$.
- Let $f(x,y) = \dfrac{e^{-\frac{yx^2}{2}}\, y^{3/2}\, e^{-y}}{\sqrt{2\pi}},\; -\infty < x < \infty,\; y > 0$.
(i) Obtain the marginal distribution of $Y$ and conditional distribution of $X$ given $Y$. [5]
(ii) Find $E(Y)$, $V(Y)$, $E(X|Y)$, $V(X|Y)$. [5]
(iii) Use (ii) to find $E(X)$, $V(X)$. [5]
- A company's trainees are randomly assigned to groups which are through a certain industrial inspection procedure by three different methods. At the end of the instructing period they are tested for inspection performance quality. The following are their scores:
| Method A | 80 | 83 | 79 | 85 | 90 | 68 | |
|---|---|---|---|---|---|---|---|
| Method B | 82 | 84 | 60 | 72 | 86 | 67 | 91 |
| Method C | 93 | 65 | 77 | 78 | 88 | | |
Using the appropriate non-parametric test, determine at 0.05 level of significance whether the three methods are equally effective.
- For a simple linear regression model
$Y = \beta_0 + \beta_1 X_i + \varepsilon_i$, $i = 1, \ldots, n$
(i) Derive the least square estimators of $\beta_0$ and $\beta_1$, clearly stating the conditions assumed. [5]
(ii) For $e_i = Y_i - \hat{Y}_i$ where $\hat{Y}_i$ is the fitted value, show that [5]
1. $\sum_{i=1}^{n} e_i = 0$
2. $\sum_{i=1}^{n} Y_i = \sum_{i=1}^{n} \hat{Y}_i$
3. $\sum_{i=1}^{n} X_i e_i = 0$
4. $\sum_{i=1}^{n} \hat{Y}_i e_i = 0$
5. The regression line passes through $(\overline{X}, \overline{Y})$.
- In usual notations, if $v$, $b$, $r$, $k$ and $\lambda$ are the parameters of a Balanced Incomplete Block Design, then show that:
(i) $b \geq r + 1 \geq \lambda + 2$
(ii) $v \leq b \leq \dfrac{r^2 - 1}{\lambda}$
- For the multiple linear regression model with two predictor variables $X_1$ and $X_2$, show that the estimate of regression coefficient of $X_1$ is unchanged when $X_2$ is added to the regression model, whenever $X_1$ and $X_2$ are uncorrelated.
- A sample of size $n$ is drawn from a population having $N$ units by simple random sampling without replacement. A sub-sample of $n_1$ units is drawn from the $n$ units by simple random sampling without replacement. Let $\bar{y}_1$ denote the mean based on $n_1$ units and $\bar{y}_2$, the mean based on $n_2 = n - n_1$ units. Consider the estimator of the population mean $\overline{Y}_N$ given by:
$$\hat{\overline{Y}}_N = w\bar{y}_1 + (1 - w)\bar{y}_2;\; 0 < w < 1$$
Show that $E(\hat{\overline{Y}}_N) = \overline{Y}_N$, and obtain its variance.
- How is the efficiency of a design measured? Derive the expression to measure the efficiency of a Randomised Block Design over a Completely Randomised Design.
- For a multiple linear regression model with three covariates $X_1$, $X_2$ and $X_3$, let $r_{ij}$ denote the correlation coefficient between $X_i$ and $X_j$. For a data, it was found $r_{12} = 0.77$, $r_{23} = 0.52$, $r_{13} = 0.72$.
(i) Check the consistency of the above data.
(ii) If $r_{13}$ is unknown, obtain the limits within which $r_{13}$ lies given the above values for $r_{12}$ and $r_{23}$.
- In cluster sampling with equal size clusters, obtain the unbiased estimate of population mean. Also obtain its sampling variance as
$$V(\bar{\bar{y}}) = (1-f)(NM-1)S^2\frac{\{1 + (M-1)\rho_{cl}\}}{M^2(N-1)n},$$
where notations have their usual meanings.
- Let $Z_{3\times 1} = \begin{pmatrix} X_{1\times 1} \\ Y_{2\times 1} \end{pmatrix} \sim N_3\left(\begin{pmatrix} 0 \\ 0 \\ 1 \end{pmatrix}, \begin{pmatrix} 1 & 2 & 1 \\ 2 & 5 & 2 \\ 1 & 2 & 2 \end{pmatrix}\right)$.
Show that conditional on $X_{1\times 1}$, the two components of $Y_{2\times 1}$ are independent but marginally they are not.
- (i) What is confounding in factorial experiments?
(ii) A $2^6$ factorial experiment is conducted in blocks of size $2^3$. Write the confounded effects such that no main effect or two factor interaction are confounded. Give the list of independent and generalised interactions confounded along with the elements of key block only.
(iii) Give the break-up of degrees of freedom for a $2^n$ factorial experiment in $2^k$ blocks.
- What are principal components? Describe how to compute the principal components of the vectors $X_1 = \begin{bmatrix} 1 \\ 0 \\ -1 \end{bmatrix}$ and $X_2 = \begin{bmatrix} -1 \\ 1 \\ 0 \end{bmatrix}$. Give $X_1$ and $X_2$ in terms of the principal components.
- Define Regression estimator. Show bias $= -\text{Cov}(\bar{x}, b)$. Under what conditions is bias negligible? Find the mean square error of the estimator to first degree of approximation. Give comparison of Regression estimator with Ratio estimator.
- (i) In stratified sampling under optimum allocation, how will you proceed to select units from different strata, if one or more $n_i$'s happens to be greater than $N_i$ ($i \geq 2$)? [10]
(ii) A sample survey was conducted in a certain district of Himachal Pradesh. Four strata A, B, C and D of villages were formed according to the acreage of fruit trees as obtained from revenue records. A random sample of villages was selected from each stratum and the number of apple orchards in each selected village was noted. The data are shown below: [10]
| Stratum | Total number of villages ($N_i$) | Number of villages in sample ($n_i$) | Number of orchards in the selected villages |
|---|---|---|---|
| A (0 - 3 acres) | 275 | 15 | 2, 5, 1, 9, 6, 7, 0, 4, 7, 0, 5, 0, 0, 3, 0 |
| B (3 - 6 acres) | 146 | 10 | 21, 11, 7, 5, 6, 19, 5, 24, 30, 24 |
| C (6 - 15 acres) | 93 | 12 | 3, 10, 4, 11, 38, 11, 4, 46, 4, 18, 1, 39 |
| D (15 acres and above) | 62 | 11 | 30, 42, 20, 38, 29, 22, 31, 28, 66, 14, 15 |
Estimate the number of orchards in the district.
- (i) For a second order polynomial model with one predictor variable, derive the least squares normal equations clearly stating the conditions assumed. How will you interpret the parameters in this model? [7]
(ii) Describe why it is recommended to work with predictor variables centred around the mean. Comment on fitted values of the response variable in this case. Prove your claim. [8]
- What are split-plot designs? When do you recommend the use of such designs? If $e_1$ and $e_2$ are the main plot and sub-plot errors respectively, both estimated in units of a single sub-plot, explain why $e_1$ is expected to be larger than $e_2$.