Mains PYQs
UPSC Mains Physics paper 1 2018 questions
- If a particle of mass $m$ is in a central force field $f(r)\hat{r}$, then show that its path must be a plane curve, where $\hat{r}$ is a unit vector in the direction of position vector $\vec{r}$.
- [Figure] Axes x, y, z with origin O; point A on the y-axis at distance $l$ from O; block of mass $m$ on the x-axis moving with velocity $\vec{v}$.
A block of mass $m$ having negligible dimension is sliding freely in x-direction with velocity $\vec{v} = v\hat{i}$ as shown in the diagram. What is its angular momentum $\vec{L}_O$ about origin O and its angular momentum $\vec{L}_A$ about the point A on y-axis ?
- When the two waves of nearly equal frequencies interfere, then show that the number of beats produced per second is equal to the difference of their frequencies.
- A current carrying circular wire loop of radius $1.0\,\mathrm{cm}$ has a magnetic moment $2.0\,\mathrm{mJ/T}$. Determine the magnetic field at an axial distance of $3.0\,\mathrm{cm}$ from the centre of the loop.
- A plane transmission grating has 3000 lines in all, having width of $3\,\mathrm{mm}$. What would be the angular separation in the first order spectrum of the two sodium lines of wavelengths $5890\,\text{Å}$ and $5896\,\text{Å}$ ? Can they be seen distinctly ?
- Use Gauss's theorem to calculate the gravitational potential due to a solid sphere at a point outside the sphere. Calculate the amount of work required to send a body of mass $m$ from the Earth's surface to a height $R/2$, where $R$ is the radius of the Earth.
- [Figure] A rod of length $L$ along the X axis from the end marked O, with $\hat{X}$, $\hat{Y}$, $\hat{Z}$ axes shown.
A rod of length $L$ has non-uniform linear mass density (mass per unit length) $\lambda$, which varies as $\lambda = \lambda_0\left(\frac{S}{L}\right)$; where $\lambda_0$ is a constant and $S$ is the distance from the end marked 'O' (as shown in the figure). Find the centre of mass of the rod.
- Two capillary tubes of lengths $2l$ and $l$ with internal radii $r$ and $2r$ respectively are connected in series. Water flows through them in streamline. If the pressure difference across the first capillary is $P$, find the pressure difference across the second one.
- A water drop of radius $0.04\,\mathrm{mm}$ is falling through air. If the coefficient of viscosity for air is $1.8\times10^{-4}$ poise, find its terminal velocity. If 100 such drops coalesce, what will be the new terminal velocity ?
- Explain the principle and working of He-Ne laser. What is the role of He gas ? Why is it necessary to use narrow tube ? How many longitudinal modes can be excited for an He-Ne laser in a cavity of length $30\,\mathrm{cm}$ and having half width of gain profile of laser material $2\times10^{-3}\,\mathrm{nm}$ ? The emission wavelength is $6328\,\text{Å}$.
- Distinguish between positive and negative crystals in terms of double refraction. How are these crystals used to make quarter wave plates ? Explain how the quarter wave plate is used in producing elliptically and circularly polarized light.
- Describe how Michelson Interferometer can be used to determine refractive index of a gas.
In a Michelson Interference experiment, a tube of length $25\,\mathrm{cm}$ containing a gas of refractive index $\mu$ is introduced between the upper mirror and the beam splitter. 150 fringes cross the centre of the field of view when the wavelength of light used is $5890\,\text{Å}$. Find the value of $\mu$.
- [Figure] Rod AB of length $l_0$ in the $x'y'$ plane making angle $\theta_0$ with the $x'$ axis; lab axes $x$, $y$.
A rod of length $l_0$ is kept at rest in $x'y'$ plane of its rest frame making an angle $\theta_0$ with $x'$ axis. What is the length and orientation of the rod in a laboratory frame $(x, y)$ in which the rod moves to the right with velocity $v$ ?
- Discuss the intensity distribution in Fraunhofer diffraction pattern due to a single slit. Obtain conditions for maxima and minima of the intensity distribution. Show that the intensity of the first maxima is about 4.95% of that of the principal maxima.
- What do you mean by spherical aberration of a lens ? Show that if two plano-convex lenses are kept at a distance equal to the difference of their focal lengths, the spherical aberration would be minimum.
- A $12.0\,\mathrm{V}$ battery is connected at $t = 0$ to a series combination of a resistor $R = 10.0\,\Omega$ and an inductor $L = 5.0\,\mathrm{H}$. At what rate is energy being stored in the inductor when the current in the circuit is $0.4\,\mathrm{A}$ ?
- Two solenoids have 500 and 800 turns of wire and are placed co-axially close to each other. A current of $5.0\,\mathrm{A}$ in the first solenoid produces an average flux of $200\,\mu\mathrm{Wb}$ through its each turn and a flux of $100\,\mu\mathrm{Wb}$ through each turn of the second solenoid. Find the self-inductance of the first solenoid and the mutual inductance of the solenoids.
- A star is receding with a speed of $3000\,\mathrm{km/s}$ and emitting spectral line of hydrogen, $\mathrm{H}_\alpha$ of wavelength $656.1\,\mathrm{nm}$. What would be the wavelength observed by an observer on the Earth ?
- One mole of a gas obeys the following equation of state :
$$\left(P + \frac{a}{v^2}\right)(v - b) = RT,$$
where $v$ is the molar volume and, $a$ and $b$ are constants.
Show that internal energy of the gas increases as the volume increases, with the temperature remaining constant.
- At $4^\circ\mathrm{C}$ temperature, the density of water is found to be maximum. Prove that heat capacity at the constant pressure ($c_p$) is equal to the heat capacity at constant volume ($c_v$) for water at $4^\circ\mathrm{C}$.
- Define a plane electromagnetic wave. A plane polarized wave is incident on the interface between two dielectric media. Obtain expressions for the amplitudes of the reflected and transmitted waves when the incident wave is polarized with its electric field $\mathbf{E}$ vector perpendicular to the plane of incidence. Discuss the phase relationships of the reflected and transmitted waves with respect to the incident wave.
- (i) What are the limitations of Rayleigh-Jeans law in explaining the spectrum of radiations from a blackbody ? Explain how these limitations were overcome in Planck's radiation law.
(ii) Deduce Wien's displacement law from Planck's radiation law.
- (i) Write down Maxwell's equations in integral form. Explain the significance of each of these equations. [5]
(ii) A parallel plate capacitor has plate area $= 4.0\,\mathrm{cm}^2$ and plate separation $= 2.0\,\mathrm{mm}$. An a.c. voltage $V = 20\sin(5\times10^3\,t)$ volts is applied across the plates. If the dielectric constant of the medium between the plates is $\varepsilon_r = 2.0$, calculate the displacement current. [5]
- If the temperature variation of heat capacity is known, how do you calculate the change of entropy during an isochoric process ?
According to Debye's theory of specific heat of a solid, the molar heat capacity of diamond crystal at constant volume varies with temperature (T) as follows :
$$c_v = \frac{12}{5}\pi^4 R\left(\frac{T}{\Theta}\right)^3$$
where $R$ is the molar gas constant $= 8.315\,\mathrm{J/mol\text{-}K}$ and $\Theta = 2230\,\mathrm{K}$ for diamond.
Calculate the change in entropy of diamond of $0.36\,\mathrm{g}$ mass when it is heated at constant volume from $0\,\mathrm{K}$ to $300\,\mathrm{K}$.
- The pressure on $100\,\mathrm{g}$ of solid copper is increased quasi-statically and isothermally at $0^\circ\mathrm{C}$ from 0 to $0.5\times10^8\,\mathrm{Pa}$. Assuming the density and isothermal compressibility to remain at constant values of $8.96\,\mathrm{g/cm}^3$ and $7.16\times10^{-12}\,\mathrm{Pa}^{-1}$, respectively, calculate the work done. Comment on the sign and magnitude of work.
- A system having two energy levels, $-\frac{1}{2}\Delta$ and $+\frac{1}{2}\Delta$ with $\Delta = 10\,\mathrm{meV}$ is populated by 1000 particles at a low temperature close to $100\,\mathrm{K}$. Obtain the average energy per particle using classical distribution law.
- A $0.5\,\mathrm{m}$ long cylindrical medium between two conducting plates has uniform charge density of $100\,\mathrm{nC/m}^3$. The axis of the cylindrical medium is along z-axis. The left plate is at $z = 0$ and has a potential of $10\,\mathrm{kV}$ and the right plate is grounded. Determine the electric field at axial distance $z = 0.2\,\mathrm{m}$.
- A uniformly magnetized sphere of radius $R$ has magnetization $\vec{M} = M_0\hat{Z}$. If the scalar magnetic potentials inside and outside the sphere are given as under
$$\phi_m = \frac{M_0}{3}Z \; ; \; r \le R$$
and
$$\phi_m = \frac{M_0}{3}\frac{R^3}{r^2}\cos\theta \; ; \; r > R$$
where, $r$, $\theta$ are two spherical coordinates, find the magnetic field inside and outside the sphere.
- Schematically, show the variation of density of states, $D(\varepsilon)$ and distribution function, $f(\varepsilon, T)$, of particles in a non-relativistic Fermi gas at high temperatures.
At a temperature $T$, an electron occupies a state with energy $100\,\mathrm{meV}$ above the Fermi energy ($\varepsilon_F$) with the probability of 1%. Find the temperature $T$.