Mains PYQs
UPSC Mains Mechanical Engineering paper 1 2021 questions
- What is the supporting force system at A for the cantilever beam shown in the figure ? Neglect the weight of the beam.
[Figure]
Figure labels: uniformly varying load 400 N/m over 1.5 m from A; 0.5 m; 1 m to B; 300 N downward load at the end of the 0.5 m segment; 500 N at B inclined 30° below horizontal.
- The velocity of a particle, moving in the x-y plane is given by $6{\cdot}12\hat{i} + 3{\cdot}24\hat{j}$ m/s at time t = 3.65 s. Its average acceleration, during the next 0.02 s is $4\hat{i} + 6\hat{j}$ m/s$^2$. Determine the velocity v of the particle at t = 3.67 s, and the angle θ between the acceleration vector and the velocity vector at t = 3.67 s.
- What is carbon equivalent (CE) ? How does the carbon equivalent of a steel affect the hardening heat treatment ?
- In the epicyclic gear train shown in the figure, the wheel 'C' is keyed to the shaft 'B'. 'D' and 'E' are compound gears. 'C', 'D' and 'E' have 35, 65 and 32 teeth respectively. All the gears have same module.
If 'A' and 'B' rotate at 60 rpm and 28 rpm respectively in opposite directions, find the speed and direction of rotation of arm 'G'.
[Figure]
- A steel wire of 8 mm diameter and length 50 m is used to lift a weight of 2000 N at its lowest end. Calculate the total elongation of the wire, if the density of the steel is 8000 kg/m$^3$ and E = $2{\cdot}1 \times 10^5$ N/mm$^2$.
- In a slider-crank mechanism, the lengths of the crank and connecting rod are 150 mm and 600 mm respectively. Locate all the I-centres of the mechanism for the position when the crank has turned 30° from IDC. Also, find the velocity of the slider and the angular velocity of the connecting rod, if the crank rotates at 30 rad/s.
- A mass weighing 100 N is suspended from a spring of constant k = 4000 N/m. At time t = 0, it has a downward velocity of 1 m/s as it passes through the position of static equilibrium. Determine the following :
(i) The static spring deflection.
(ii) The natural frequency of the system.
(iii) The displacement (x) of the mass as a function of time, where x is measured from the position of static equilibrium.
(iv) The maximum acceleration attained by the mass.
- Write the equations for shearing force and bending moment for various sections and draw SFD and BMD for the beam supported at A and B as shown in the figure.
[Figure]
Figure labels: beam A-C-D-B-E; 2 kN-m moment at C; 1 kN downward at D; 1 kN downward at E; spans 2 m, 2 m, 2 m, 1 m; supports at A and B.
- What is the purpose of tempering of hardened steel ? Explain the principle of tempering using suitable schematics including heating temperature requirement and microstructural changes.
- A solid circular shaft is subjected to a bending moment of 2500 N-m and a torque of 8000 N-m. The ultimate tensile stress and ultimate shear stress of the shaft material are 700 MPa and 500 MPa respectively. Assuming a factor of safety as 6, determine the diameter of the shaft.
- A single cylinder, four-stroke engine develops 20 kW at 250 rpm. The work done by the gases during the expansion stroke is 3 times the work done on the gases during the compression stroke. The work done during the suction and exhaust strokes may be neglected. During expansion and compression strokes the turning moment curve is assumed to be triangular. If the flywheel has a mass of 1500 kg and has a radius of gyration of 0.6 m, find the coefficient of fluctuation of speed.
- Find out the value of atomic packing factor for the FCC crystal structure.
Calculate the radius of an iridium (Ir) atom, given that Ir has an FCC crystal structure, a density of 22.4 g/cm$^3$ and an atomic weight of 192.2 g/mol.
[Avogadro's number ($N_A$) = $6{\cdot}022 \times 10^{23}$ atoms/mol]
- An inscribed circular hole is made in a triangular lamina with each side 'a'. Find the area moment of inertia of this lamina about one of the sides.
- Four masses A, B, C and D revolve at equal radii and are equally spaced along a shaft. The mass B weighs 6 kg. Masses C and D make angles of 90° and 240° respectively with B in the same direction.
Find the magnitude of the masses A, C and D and the angular position of A, if the system is in complete balance.
- TIG welding of two sheets of 5 mm thickness is performed using welding current (I) of 200 A and arc voltage (V) of 12 V. Assume 70% of generated arc heat is utilised for melting of base metals. If the steel being welded needs 20 J/mm$^3$ heat for melting, then determine the following :
(i) Power of welding arc (W)
(ii) Rate at which energy is delivered for melting (W)
(iii) Volume rate (mm$^3$/sec) at which weld metal is produced
- A high speed steel (HSS) cutting tool during turning of aluminium offers tool life of 3 hours at cutting speed of 60 m/minute. Determine the following using above data and assuming value of n is 0.27 :
(i) Life of tool if turning is performed at 80 m/minute cutting speed.
(ii) Cutting speed at which cutting tool will have tool life of 2 hours.
- What are the reasons for carrying inventories in production industries ?
- An XYZ company launched a new product which had sales of 5, 17, 29, 41 and 39 units respectively in its first five months of launch. The Sales Manager now wants a forecast of sales in the next month.
(i) Find out sales forecast by the last value method, the averaging method and the moving average method with the 3 most recent months.
(ii) Given the sales pattern so far, do any of the above methods seem inappropriate for obtaining the forecast ? Why ?
- A mechanic needs a gauge for checking the diameter of holes to be machined to a diameter of $30^{+.06}$ mm. What should be the dimensions of the gauge, if unilateral system of tolerances are incorporated ? Assume gauge tolerance and wear allowance each as 10% of work tolerance.
- Five jobs A, B, C, D and E need to be processed on a machine. Processing time (in days) and due date (from now) are given below :
| Jobs | Processing Time (in days) | Due Date (from now) |
|---|---|---|
| A | 6 | 5 |
| B | 4 | 10 |
| C | 5 | 15 |
| D | 8 | 20 |
| E | 7 | 30 |
Determine the total completion time (in days) for all jobs, average flow time, average number of jobs in system per day and average tardiness using Shortest Processing Time (SPT) rule so as to establish appropriate sequence for processing of jobs.
- Three cities namely Chennai, Delhi and Kolkata are being considered as potential locations for a new plant. Estimated data of annual fixed cost, variable cost and revenue per unit for each potential location are given below in the table. Determine the most attractive location for the plant if the estimated annual production volume desired is 40000 units. Also determine break-even production volume for each location.
| Head | Chennai | Delhi | Kolkata |
|---|---|---|---|
| Fixed cost (₹) | 800000 | 600000 | 500000 |
| Variable cost per unit (₹) | 30 | 40 | 50 |
| Revenue per unit (₹) | 60 | 60 | 60 |
- Orthogonal turning of a metal is performed using single point cutting tool having rake angle of 10°. The turning operation produces chip-thickness ratio of 0.2, horizontal cutting force ($F_H$) of 1400 N and vertical cutting force ($F_V$) of 2000 N. Determine the shear plane angle, normal force, friction force on rake face and friction angle.
- A car servicing company is interested in reducing the waiting time for its customers. They select four customers randomly each day and find the waiting time for each customer while his/her car is serviced. From these observations, the sample average and range are found. This process is repeated for 25 days. The summary data for these observations are as under :
$$\sum_{i=1}^{25} \overline{X}_i = 1000, \quad \sum_{i=1}^{25} R_i = 250$$
(i) Find out $\overline{X}$ and R chart control limits.
(ii) Assuming that the process is in control and the distribution of waiting time is normal, find the percentage of customers who will not have to wait for more than 50 minutes.
(iii) Find the 2σ control limits.
(Factors for Computing Centerline and Three-Sigma Control Limits and Cumulative Standard Normal Distribution table are appended in the question paper)
- How do lean systems function ? What are the characteristics of lean systems ? Also, discuss the benefits and risks of lean systems.
- In a case of open die forging, derive the expression for determining forging force per unit length for forging a flat strip between two parallel dies. Also, state the assumptions made while deriving the above mentioned expression.
- The frontal working area of the electrode is 2000 mm$^2$ in a certain ECM operation in which the applied current = 1800 amps and the voltage = 12 volts. The material being cut is nickel (Valency = 2), whose specific removal rate is $3{\cdot}42 \times 10^{-2}$ mm$^3$/A-s.
(i) If the process is 90% efficient, determine the rate of material removal in mm$^3$/minute.
(ii) If the resistivity of the electrolyte is 140 ohm-mm, determine the working gap.
- The layout of material storage section is given below. The material flow occurs between packing area (No. 6) and other 9 sections/areas. Loads are moved from packing area 6 to shipping/receiving area 1, while all other loads move from different sections/areas (2, 3, 4, 5, 7, 8, 9) to packing area No. 6. Average annual load movement/flow to/from sections is as under :
[Figure]
| Flow From - To | Average Annual Load (No.) | Distance Covered (m) |
|---|---|---|
| 2 to 6 | 200 | 50 |
| 3 to 6 | 300 | 50 |
| 4 to 6 | 400 | 50 |
| 5 to 6 | 500 | 50 |
| 7 to 6 | 600 | 50 |
| 8 to 6 | 700 | 50 |
| 9 to 6 | 800 | 50 |
| 10 to 6 | 900 | 50 |
| 6 to 1 | 4400 | 100 |
Figure labels: layout grid with areas 2, 3, 4 on top row; 1, 5, Packing area 6, 7 in middle row; 8, 9, 10 in bottom row.
Assume cost of moving a load by unit distance (m) is ₹ 1/m. Determine the annual total cost of material handling.
- Explain 'Coordinate system' and 'Motion control' with reference to NC machines.