Mains PYQs
UPSC IFoS Mains Civil Engineering paper 2 2017 questions
- A 9 degree curve branches off from a 8 degree main curve in an opposite direction in the layout of a M.G yard. If the speed restriction on main line is $40\,\mathrm{km/hr.}$, what would be the speed restriction on branch line ? Assume permissible cant deficiency as $50\,\mathrm{mm}$.
- A two lane undivided State Highway with thick bituminous pavement surface in high rainfall region has horizontal curve of radius $2950\,\mathrm{m}$. If design speed is $100\,\mathrm{km/hr.}$, what is the superelevation requirement ? Also draw the cross-section at curved portion.
- A line of levels was run from $A$ to $B$. The levelling was then continued to a B.M. of elevation $40.0\,\mathrm{m}$. The readings obtained are as under. Obtain the reduced level of $A$ and $B$.
| B.S | I.S | F.S | R.L | Remarks |
|---|---|---|---|---|
| 1.195 | | | | $A$ |
| 0.445 | | 2.370 | | |
| 2.150 | | 0.995 | | |
| | 0.720 | | | $B$ |
| 1.465 | | 0.260 | | |
| 2.630 | | 0.905 | | |
| | | 1.305 | 40.0 | B.M |
- Explain in brief the important factors that affect the selection of Construction Equipment.
- (i) Light weight aggregate concrete.
(ii) Types of rollers commonly used in construction projects for compacting soil.
- What do you understand by the term "segregation" of concrete ? What are the common causes of segregation ? What are the methods of prevention of segregation ? How bleeding is different from segregation ? What are the causes and how it can be prevented ?
- For the following traverse, compute the length of line $CD$ so that $A$, $D$ and $E$ may be in one straight line :
| Line | Length(m) | Bearing |
|---|---|---|
| $AB$ | 110 | $83^\circ 12'$ |
| $BC$ | 165 | $30^\circ 42'$ |
| $CD$ | ? | $346^\circ 06'$ |
| $DE$ | 212 | $16^\circ 18'$ |
- Draw a labelled sketch of Right hand turnout, clearly highlighting the movement of train on both the routes i.e. main and diverted.
- Draw a network diagram to represent the following project. Calculate the occurrence times of the events and activity times. Also determine the critical path.
| Activity Id | Predecessor | Description | Time (weeks) |
|---|---|---|---|
| $A$ | - | Prepare site | 1 |
| $B$ | $A$ | Pour foundation | 6 |
| $C$ | $B$ | Buy shrubs etc. | 3 |
| $D$ | $B$ | Roof | 2 |
| $E$ | $D$ | Do interior work | 3 |
| $F$ | $C$ | Landscape | 4 |
| $G$ | $E, F$ | Move in | 1 |
- What are the approximate oxide composition limits found in ordinary portland cement ? Briefly explain the functions of following oxides :
(i) Lime (ii) Silica (iii) Alumina (iv) Iron oxide
- Calculate stopping sight distance on a highway at level stretch for a design speed of $80\,\mathrm{km/hr.}$ Also calculate the effect of $2\%$ descending gradient on the SSD. Assume other data as per IRC recommendations.
- A flexible pavement is designed for a $7.0\,\mathrm{m}$ wide carriage way with following data :
Commercial traffic per day $= 600$ (As on 1.1.2012)
Planning and construction period $= 1$ year
Rate of traffic growth per annum $= 10\%$
Design life $= 15$ years
Vehicle damage factor $= 2.0$
Because of some legal issues project could not be completed in time and it got delayed by 4 years. However pavement design remains the same. Will it have some implications on design life of the project ? What will be the new design life of the road ?
- What is seasoning of Timber ? Write in brief the various methods of seasoning of timber.
- Write a short note on the following. Wherever necessary explain the questions.
(i) Slack
(ii) CPM vs PERT
(iii) What does a positive slack, a zero slack and a negative slack indicate in a real life project scenario ?
(iv) Bar chart
- The maximum increase in temperature is expected to be $24^\circ\mathrm{C}$ after the construction of cement concrete pavement. If the expansion gap is of $2.0\,\mathrm{cm}$ design the spacing between the expansion and contraction joints. Assume allowable stress in concrete (tension) during initial period of curing $= 0.8\,\mathrm{kg/cm^2}$; coeff. of thermal expansion of cement concrete $10 \times 10^{-6}$ per $^\circ\mathrm{C}$, unit wt. of concrete $= 2400\,\mathrm{kg/m^3}$ and coeff. of friction at interface as 1.3.
- A vehicle moving at $40\,\mathrm{km/hr}$ was stopped by applying the brakes and the length of skid mark was $12.2\,\mathrm{m}$. If the average skid resistance of the pavement is known to be 0.70, determine the brake efficiency of the test vehicle.
- Define the infiltration indices $\phi$-index and $\omega$-index with sketches and determine the $\phi$-index and $\omega$-index when the half hourly rainfall rate for a period of 4 hours storm are 1.8, 2.7, 3.8, 5.5, 3.2, 2.6, 2.2 and $1.2\,\mathrm{cm/hr}$. The corresponding run-off is $3.3\,\mathrm{cm}$. The effective surface retention is zero.
- (i) Write the various losses in canals. [4]
(ii) Explain Drainage and Pressure release arrangements behind canal lining. [4]
- Explain the design considerations of earth dams in Earthquake regions.
- A small town with water demand as given below requires a storage reservoir. Assuming that the pumping is done uniformly @ constant rate for 24 hrs, estimate the storage capacity of the reservoir. Population of the town is 50000. Assume fire demand as 2 lpcd.
| Time | 0-4 | 4-8 | 8-12 | 12-16 | 16-20 | 20-24 |
|---|---|---|---|---|---|---|
| Demand (ML) | 0.48 | 0.87 | 1.33 | 1.00 | 0.82 | 0.54 |
- Explain the impacts of disposal of wastewater with following characteristics into fresh water :
(i) Nutrients (ii) Heavy metals (iii) Oil and grease (iv) Suspended solids
- Three wells are situated forming an equilateral triangle with a side distance of $110\,\mathrm{m}$. All the three wells are penetrated fully into a $10\,\mathrm{m}$ thick Aquifer with medium sand having coefficient of permeability of $50\,\mathrm{m/day}$. The radius of wells are $15\,\mathrm{cm}$ and worked under a depression head of $3.5\,\mathrm{m}$ at well face. The radius of influence of each well is $240\,\mathrm{m}$. All the wells have same characteristics. Compute the yield of each well.
- (i) What is the purpose of unit hydrograph and how it is derived from a simple flood hydrograph of isolated storms. [5]
(ii) What is synthetic unit hydrograph and write the equations for standard duration, lag time and width of the synthetic unit hydrograph at various percentages of discharges. [5]
- Specify permissible drinking water quality standard for the following parameters and explain the effects of these parameters on human health :
(i) Fluorides (ii) Nitrates (iii) Chlorides (iv) Total hardness (v) Total dissolved solids
- A river with saturation DO (@ $25^\circ\mathrm{C}$) $8.4\,\mathrm{mg/l}$ and self purification ratio, (f) 2.4 receives treated wastewater. Find the permissible BOD in the treated wastewater if rate constant $k_1$ (@ $25^\circ\mathrm{C}$) is $0.1$/day.
- The section of throat of saddle syphon spillway is width $= 5\,\mathrm{m}$ and height $= 2.5\,\mathrm{m}$.
Full reservoir level $= +252.00\,\mathrm{m}$
Crest level of spillway $= +248.00\,\mathrm{m}$
Level of center of syphon outlet $= +240.00$
High flood level in the reservoir $= +254.00$
If the high flood discharge is 650 cumecs, determine the number of syphon units required to pass the high flood discharge safely. Coeff. of discharge $= 0.85$ and the syphon discharges freely into air.
- (i) Explain hygroscopic water in soil and permanent wilting point along with diagram. [5]
(ii) What is consumptive use of water and write the factors affecting consumptive use of water in irrigation. [5]
- (i) Give a flow chart indicating sequence of units in domestic wastewater treatment plant. Specify the objectives of each unit. [5]
(ii) Differentiate between BOD and COD. Explain the importance of COD/BOD ratio in selection of treatment units. [5]
- Explaining the environmental impacts of river valley projects, suggest environmental management plan to mitigate the negative impacts of the project.
- Explain the causes of failures of weirs and write the preventive measures.
- Explain the purpose and suitability of the following with diagrams :
(i) Aqueducts [4]
(ii) Non modular pipe outlet [3]
(iii) Groynes in river training [3]
- Explaining the advantages of sanitary landfills over open dumps, discuss how landfill problems are addressed.
- With help of line sketch, explain the working principles of Electrostatic precipitators and fabric filters in air pollution control.