Mains PYQs
UPSC Mains Civil Engineering paper 2 2019 questions
- (i) Why is cube strength different from cylinder strength for the same grade of concrete?
(ii) What is Bauschinger effect? Where is it relevant?
- What does creep of concrete mean? Is creep harmful or beneficial? What factors influence creep?
- While carrying out the permanent adjustment of a dumpy level by two-peg method, the following observations were made :
Instrument at peg $E$, midway between the points $C$ and $D$, 100 m apart
Reading at point $C$ = 2.0 m
Reading at point $D$ = 3.0 m
Instrument at peg $F$, inline of $C$ and $D$, such that $CF$ = 120 m and $DF$ = 20 m
Reading at point $C$ = 1.50 m
Reading at point $D$ = 2.75 m
Check whether the instrument needs permanent adjustment or not, and whether the line of sight is inclined upwards. What should be the correct reading at point $C$ if the instrument is to be adjusted?
- The following are the activities and the logic for a project. Develop the network for the project :
(i) $A$ and $B$ can be carried out at the same time. They represent the beginning of the job.
(ii) $K$ follows $E$.
(iii) $X$ depends on $Q$ and $K$.
(iv) Neither $F$ nor $G$ can be started before $B$ is completed, but they can be concurrently performed.
(v) $E$ and $Q$ follow $A$.
(vi) $Q$ must be carried out before $J$.
(vii) $C$ depends on the completion of $F$ and $G$.
(viii) $E$ and $Q$ can be executed at the same time.
(ix) $Z$ can only be started when $C$, $X$ and $J$ are finished.
(x) $Z$ is the last activity.
- What are the components of a permanent way? Draw the cross-section of a single-line BG track on embankment and show therein all the components.
- Explain the following :
(i) High performance concrete
(ii) Self-compacting concrete
(iii) Fibre-reinforced concrete
(iv) Polymer concrete
(v) Ferro-cement
- What factors influence the geometric design of a highway? What are the objects and elements need to be considered while designing a highway?
Calculate the minimum sight distance required to avoid head-on collision of two cars approaching from the opposite direction at 90 kmph and 60 kmph. Assume a reaction time of 2.5 seconds, coefficient of friction of 0.7 and brake efficiency of 50% in either case.
- A building project consists of 12 activities. The normal duration required to perform various activities and the relationship among the activities are given below :
| Activity | A | B | C | D | E | F | G | H | I | J | K | L |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Predecessor | - | - | A | A | B | B | C | C | D, E | F | G | H |
| Duration (in weeks) | 7 | 5 | 10 | 5 | 8 | 6 | 5 | 4 | 10 | 5 | 8 | 9 |
Compute (i) the project completion time, (ii) the critical path and (iii) the total float and free float for each activity.
- Write short notes on the following :
(i) Hairpin bend
(ii) Retaining and breast walls
(iii) Scupper
While aligning a highway in a built-up area, it was necessary to provide a horizontal circular curve of radius 400 m. Design the following geometric features as per IRC formula :
(1) Superelevation
(2) Extra widening of pavement
(3) Length of the transition curve
The data available are :
Design speed = 75 kmph
Length of the wheelbase of the longest truck = 6 m
Pavement width = 10.5 m
- (i) What are the materials used for thermal insulation over roof? Describe the three types of membrane used for roof waterproofing.
(ii) What are the most effective ways of providing durability to concrete against chemical attack in a known adverse environment?
- (i) Classify spirit levelling and briefly explain the different types of them.
(ii) Compute the missing data in the following level book page :
| Station | BS | IS | FS | Rise | Fall | HI | RL |
|---|---|---|---|---|---|---|---|
| 1 | ? | | | | | 23.18 | 20.00 |
| 2 | | 1.59 | | ? | | | ? |
| 3 | 1.28 | | ? | | 1.08 | ? | ? |
| 4 | ? | | 4.0 | | ? | 18.33 | ? |
| 5 | | ? | | | 2.19 | | ? |
| 6 | ? | | | ? | | | 15.72 |
| 7 | | | 2.95 | | ? | | ? |
- Distinguish between flexible and rigid pavements. With the help of neat sketches of cross-sections of pavements, enumerate the functions of their components. What are the causes of failures of flexible and rigid pavements?
- For the project network shown in the figure and data given below, determine the optimum time duration and cost. Also plot a curve of total cost vs. time and indicate on it the optimum time and optimum cost :
[Figure] Network: node 10 to node 20, node 20 to node 30, node 20 to node 40, node 30 to node 40
| Activity | Normal time ($T_n$) in days | Crash time ($T_c$) in days | Normal cost ($C_n$) in Rs | Crash cost ($C_c$) in Rs | Cost slope in Rs per day |
|---|---|---|---|---|---|
| 10-20 | 4 | 3 | 400 | 600 | 200 |
| 20-30 | 5 | 2 | 300 | 750 | 150 |
| 20-40 | 7 | 5 | 360 | 540 | 90 |
| 30-40 | 4 | 2 | 500 | 1000 | 250 |
Indirect cost = Rs 250 per day.
- Calculate the maximum permissible load of a BG locomotive with 3 pairs of driving wheels with axle load of 22 tonnes each on a straight level track at a speed of 80 kmph. Also calculate the reduction in speed if the train has to run a rising gradient of 1 in 200. What would be the further reduction in speed if the train has to negotiate a 4$^\circ$ curve on a rising gradient of 1 in 200, assuming coefficient of friction as 0.2?
- The normal annual rainfalls at stations $A$, $B$, $C$ and $D$ in a basin are 80.97 cm, 67.59 cm, 76.28 cm and 92.01 cm respectively. In the year 1985, station $D$ was inoperative and stations $A$, $B$ and $C$ recorded annual precipitation of 91.11 cm, 72.23 cm and 79.89 cm respectively. Estimate the rainfall at station $D$ in that year.
- An artesian tube well has a diameter of 20 cm. The thickness of aquifer is 30 cm and its permeability is 38 m/day. Find its yield under a drawdown of 4 m at the well face. Use radius of influence as recommended by Sichardt.
- A watercourse has a culturable commanded area of 1200 hectares. The intensity of irrigation for crop $A$ is 40% and for crop $B$ is 35%, both the crops being Rabi crops. Crop $A$ has kor period of 20 days and crop $B$ has kor period of 15 days. Calculate the discharge of the watercourse if the kor depth for crop $A$ is 10 cm and for crop $B$, it is 16 cm.
- In a BOD analysis, 10.0 mL of industrial wastewater sample was diluted with 290.0 mL of seeded dilution water. The initial DO was 9.2 mg/L and after 5 days of incubation at 20 $^\circ$C, the final DO of the sample with seeded dilution water was 2.0 mg/L. The final DO of the seeded dilution water is 8.0 mg/L. The volume of the BOD bottle was 300.0 mL. Determine the 5-day, 20 $^\circ$C BOD of the sample.
- The chlorine residuals measured when various dosages of chlorine were added to a water sample are given below :
| Chlorine dosage (mg/L) | 0 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 |
|---|---|---|---|---|---|---|
| Chlorine residual (mg/L) | 0 | 0.01 | 0.02 | 0.08 | 1.9 | 0.24 |
| Chlorine dosage (mg/L) | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 |
|---|---|---|---|---|---|
| Chlorine residual (mg/L) | 0.3 | 0.2 | 0.24 | 0.3 | 0.46 |
Determine :
(i) The break-point dosage
(ii) The chlorine demand of the water sample
(iii) The design dosage to obtain a free residual of 0.2 mg/L at the last consumer's tap if the water distribution network being old exerts additional chlorine demand of 0.3 mg/L
- A main sewer is to be laid for a residential cum commercial area of a town. The area has a residential population of 5000 persons and floating population (offices and shops) of another 5000 persons. The residential population consume 150 lpcd of water, while the floating population consume 45 lpcd of water. Assuming that 90% of water consumed emerges as wastewater, and this also includes infiltration and inflows, design the main sewer. Consider the sewer flowing full at peak discharge. Take peak factor of 3 and minimum discharge factor as one-third. The natural slope of the ground is 1 in 400. Assume Manning's $n$ = 0.013. Check the sewer for minimum and maximum velocities, and comment on the suitability of design.
- A water treatment plant has a horizontal flow sedimentation tank with a surface overflow rate of 17 m$^3$/day-m$^2$. What percentage of removal should be expected for particles having settling velocities of 0.1 mm/sec, 0.2 mm/sec and 1.0 mm/sec respectively considering the tank behaving as an ideal sedimentation tank?
- A channel section has to be designed for the following data :
Discharge, $Q$ = 30 cumecs
Silt factor, $f$ = 1.00
Side slope = $\frac{1}{2}$ : 1
Find also the longitudinal slope. Use Lacey's theory.
- A dam 6 m high and 1.5 m wide at the top has vertical water face as shown in the figure below. Find the base width of the dam if no tension is to develop. Take unit weight of masonry as 20 kN/m$^3$ and uplift pressure intensity coefficient $c$ as 1. Investigate the stability of the dam if the coefficient of friction is 0.6 and maximum allowable compressive stress is 1800 kN/m$^2$ :
[Figure] Dam section: water on the vertical face, height 6 m, top width 1.5 m, base width b
- A catchment has six rain gauge stations. In a year, the annual rainfalls recorded by the gauges are as follows :
| Station | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| Rainfall (in cm) | 82.6 | 102.9 | 180.3 | 110.3 | 98.8 | 136.7 |
(i) Determine the standard error in the estimation of mean rainfall in the existing set of rain gauges.
(ii) For a 10% error in the estimation of the mean rainfall, calculate the optimum number of rain gauge stations in the catchment.
- Septic tanks are one of the most common on-site treatment systems in areas not having sewerage system. Draw a neat diagram of a septic tank showing various arrangements-inlet, outlet, baffles, air vent, etc. Also draw section of an unlined soak pit for the final disposal of the septic tank effluent.
- An impervious floor of a weir on permeable soil is 16 m long and has sheet piles at both the ends. The upstream pile is 4 m deep and the downstream pile is 5 m deep. The weir creates a net head of 2.5 m. Neglecting the thickness of the weir floor, calculate the uplift pressures at the junction of the inner faces of the pile with the weir floor using Khosla's theory.
- Explain the methods for sustainable management of municipal solid wastes by emphasizing the role of source reduction and reuse, source segregation, segregated collection and transportation, material recovery, recycling, composting, waste to energy and the final disposal of remaining waste materials in sanitary landfill.
- Discuss the process of getting environmental clearance, involving screening, scoping, public hearing, appraisal and monitoring; based on environmental impact assessment for river valley projects.