Mains PYQs
UPSC IFoS Mains Chemistry paper 2 2025 questions
- Based on Huckel's rule of aromaticity, identify the following species as aromatic, antiaromatic, and nonaromatic :
[Figure]
(I) cyclopropene ring fused/drawn with an O substituent; (II) cyclopropene ring with B–CH$_3$; (III) cyclopropene ring with a cationic C–CH$_3$ ($\mathrm{C^{\oplus}}$–$\mathrm{CH_3}$); (IV) four-membered ring with an exocyclic O and a positive charge; (V) four-membered ring with a positive charge
- Write the major product of the following reaction and give mechanism :
[Figure]
N-alkyl (propyl-type chain) N–H hydroxylamine sulfonate $\mathrm{N{-}OSO_2Ar}$ + an alkene $\mathrm{C{=}C}$, with Base $\rightarrow$ ?
- Giving appropriate explanation, compare the order of reactivity of pyrrole and thiophene towards an electrophile.
- Write the products (major/minor) in the following reaction sequence :
[Figure]
A bromoalkane (alkene-containing chain with a branched isopropyl-type carbon bearing Br) with $\mathrm{MeO^{\ominus}}$ $\rightarrow$ ?
- Write the products of the following reaction and justify the stereochemical outcome with an appropriate mechanism :
[Figure]
Bicyclic alkene (norbornene-type) with i) $\mathrm{Hg(OAc)_2}$ ii) $\mathrm{NaBH_4}$ $\rightarrow$ ?
- Write the products in the following transformations :
[Figure]
$\mathrm{CH_3{-}C(OH)(CH_3){-}C(OH)(Ph){-}Ph}$ diol (pinacol type: $\mathrm{CH_3}$ and $\mathrm{CH_3}$ on one carbinol carbon, Ph and Ph on the other), with conc. $\mathrm{H_2SO_4}$ (cold) $\rightarrow$ ? ; and with $\mathrm{CH_3COOH}$/conc. $\mathrm{H_2SO_4}$ $\rightarrow$ ?
- Indicate the products in the following sequence of reactions :
[Figure]
Bicyclic cyclooctadiene fused to cyclobutene, $\xrightarrow{140^\circ\mathrm{C}} A \xrightarrow{220^\circ\mathrm{C}} B$
- Giving the most plausible mechanism, complete the following reaction :
[Figure]
Cyclopentane ring with a quaternary carbon bearing $\mathrm{COCH_3}$ and $\mathrm{CH_3}$, and an adjacent carbon bearing $\mathrm{CH_2COOC_2H_5}$; with $:B$ (1 eqv.) $\rightarrow$ ?
- Compare the rate of acetolysis of A and B giving suitable justification. Also give the product(s) of acetolysis in each case with mechanisms :
[Figure]
(A) and (B) are cyclohexane rings with adjacent OAc and OTs substituents; in (A) OAc is wedged and OTs is hashed (trans); in (B) both OAc and OTs are wedged (cis)
- Complete the following reaction along with the mechanism. Also indicate the product spread with suitable reasons :
[Figure]
1-substituted cyclohexane bearing a tertiary alcohol (a cyclohexyl group on a C(CH$_3$)$_2$OH carbon), with $\mathrm{BF_3/Et_2O}$ $\rightarrow$ ?
- Giving the products, complete the following reactions along with their mechanisms :
(i) [Figure] 2,4-dibromo ketone with tert-butyl groups on both sides (di-tert-butyl ketone brominated at both alpha carbons, Br Br), with KOH/DMSO $\rightarrow$ ?
(ii) [Figure] Bicyclic cyclobutanone fused to a methylcyclohexene, with Br (wedge) at the ring fusion carbon next to the C=O and H (wedge) at the other fusion carbon, with NaOH/$\mathrm{CH_3CN}$ $\rightarrow$ ?
- Write the products A, B and C in the following transformation indicating the processes involved and electron flow :
[Figure]
2H-pyran-2-thione ring (C=S and ring O) with substituent R, $\xrightarrow{\Delta} A \xrightarrow{\Delta} B \xrightarrow{\Delta} C$
- Write the products with mechanisms in the following reaction sequences :
(i) [Figure] 9-(substituted) fluorene bearing the ammonium group $\mathrm{CH_3{-}N^{\oplus}(CH_3){-}CH_2{-}Ph}$ at C9, with $\mathrm{CH_3O^{\ominus}}$ $\rightarrow$ ?
(ii) $\mathrm{Ph{-}C(=O){-}CH_2{-}S^{\oplus}(CH_3){-}CH_2{-}Ph}$ with $:B$ $\rightarrow$ ?
- Write the reaction of diethyl malonate with acetaldehyde in the presence of piperidine (as catalyst). Also write the mechanism for the product(s) formation.
- Giving mechanism, complete the following reaction :
$$\mathrm{PhCHO + CH_3{-}C(=O){-}NH{-}CH_2COOH \xrightarrow[Ac_2O]{CH_3COONa} ?}$$
- In the following reaction :
[Figure]
Butanone (2-butanone) with i) Base ii) $\mathrm{CH_3I}$ gives A (Thermodynamically-controlled product) + B (Kinetically-controlled product)
(i) Identify A and B.
(ii) Write a name of a base in each case to form A and B regioselectively.
(iii) Write the nature of solvent and the reaction temperature required for regioselective formation of A and B.
(iv) Give the mechanism of formation of A and B.
- Identify the reaction from the following reactions (i - iv) that shows primary kinetic isotope effect for the H-atom (C - H) and show the mechanism of the reaction to identify the rate limiting step :
[Figure]
(i) Benzene (C–H shown) $\xrightarrow{FeCl_3,\,Br_2}$ bromobenzene
(ii) Allyl phenyl ether with ortho C–H shown $\xrightarrow{Heat}$ 2-allylphenol (Claisen rearrangement)
(iii) Acetone-type ketone with alpha C–H shown $\xrightarrow{Br_2\,|\,H^{\oplus}}$ alpha-bromo ketone
(iv) 2-Butanol-type secondary alcohol with C–H shown $\xrightarrow{H_2SO_4}$ alkene
- Complete the following reaction with mechanism :
[Figure]
p-substituted nitrobenzene (Z para to $\mathrm{NO_2}$) with $\mathrm{{}^{\ominus}CN}$ $\rightarrow$ ?
- (i) Arrange the following compounds in order of their decreasing acidity and give suitable justification : [5]
[Figure]
I: indene; II: fluorene; III: 1,2,3,4,5-pentakis(trifluoromethyl)cyclopentadiene (five $\mathrm{CF_3}$ groups on a cyclopentadiene ring, sp3 carbon bearing $\mathrm{CF_3}$)
(ii) Complete the following reactions and give suitable explanation for the formation of the major products : [5]
[Figure]
Methyl vinyl ketone $\xrightarrow{?}$ 2-methylbut-3-en-2-ol (1,2-addition product); and $\xrightarrow{?}$ butan-2-one (1,4-addition/conjugate reduction product)
- What is/are the products obtained in a reaction when pyrrole is reacted with chloroform in aqueous basic solution ? Write the mechanism of product(s) formation.
- Derive the structure of the monomeric product that is identifiable by HPLC in Edman degradation of a peptide.
- Write the complementary base pairs in RNA and show their H-bondings by drawing the structure of the bases.
- Complete the following reaction and identify the electronic states involved in the reaction by showing the proper mechanism for formation of the product(s).
[Figure]
Benzophenone ($\mathrm{Ph_2C{=}O}$) $\xrightarrow[isopropanol]{h\nu}$ ?
- Write the $^1$H NMR spectral data of pure ethanol in anhydrous $\mathrm{CDCl_3}$ indicating approximate chemical shift values of each signal and their spin multiplicity and integration.
- A compound having molecular formula $\mathrm{C_4H_6O_3}$ gives the following mass fragments. Deduce the fragmentation pattern to identify the mass peaks and the base peak.
m/z = 102, 60, 43, 42, 15.
- An organic compound with molecular formula $\mathrm{C_{10}H_{12}O_2}$ exhibits the following spectral data :
IR ($\mathrm{cm^{-1}}$) : 3100, 2944, 2856, 1690, 1100 $\mathrm{cm^{-1}}$
$^1$H NMR ($\mathrm{CDCl_3}$) : $\delta$ 7.80 (2H, d, J = 8 Hz), 6.80 (2H, d, J = 8 Hz), 4.10 (2H, q, J = 7.2 Hz), 2.4 (3H, s), 1.25 (3H, t, J = 7.2 Hz)
Mass : m/z 164, 121, 43, 15.
Derive the structure of the compound and assign all the data.
- Write the products formed in the following reactions and give suitable mechanism/explanation. [5x3=15]
[Figure]
(i) Bicyclic cyclopentanone with fused cyclopropane bearing methyl and isopropyl groups (a thujone-type bicyclo[3.1.0]hexan-3-one), $\xrightarrow{h\nu}$ ?
(ii) $\mathrm{Ph{-}C(=O){-}CH_2{-}N}$(piperidine) $\xrightarrow{h\nu}$ ?
(iii) 1,6-diphenylhexa-1,3,5-triene-type (Ph on each terminal alkene, cyclic Z,Z-diene drawn as a ring-like chain) $\xrightarrow{h\nu}$ ?
- (i) Write approximate $^1$H NMR chemical shift values and multiplicity of each signal to differentiate between ethyl acetate and methyl propionate. [5]
(ii) A compound having molecular formula $\mathrm{C_{11}H_{20}O_4}$ gives the following $^1$H NMR data. Identify the compound and assign the protons.
$^1$H NMR ($\mathrm{CDCl_3}$, 300 MHz) : $\delta$ 4.18 (q), 1.92 (t), 1.24 (q), 0.82 (t) ppm. [5]
- (i) What will be the number average and weight average molecular weight of a sample of propylene oligomer that consists of 5 mol of pentamer and 10 mol of hexamer ? [10]
(ii) Mention the product of the given reactions with proper mechanism : [5]
[Figure]
Cyclohexene $\xrightarrow[H_2O]{OsO_4} B$ and cyclohexene $\xrightarrow[H_2O\cdot HClO_4]{MCPBA} A$
- (i) Propose the chemical reaction for synthesis of polyphosphonitrilic chloride. The freshly prepared polyphosphonitric chlorides are soluble in chloroform but insoluble in petroleum. Why ? [10]
(ii) Propose the mechanism for synthesis of silicones from dialkyl dichlorosilane. How is chain branching introduced in silicones ? [10]
- (i) Calculate the ultraviolet absorption maxima of substituted dienes using Woodward-Fieser rules : [5]
[Figure]
(I) steroid skeleton (four fused rings) with $\mathrm{C_8H_{17}}$ side chain, AcO at C3, 5$\alpha$-H (hashed), two angular methyls, and a double bond in the five-membered D ring (C14=C15-type, conjugated/exocyclic arrangement as drawn)
(II) steroid-type skeleton with $\mathrm{C_9H_{19}}$ side chain, a heteroannular/homoannular diene system with three double bonds in rings A, B and C as drawn
(ii) Deduce the $\lambda_{max}$ values in given $\alpha$-$\beta$-unsaturated carbonyl compounds using Woodward-Fieser rules : [5]
[Figure]
(I) decalin-type bicyclic ketone with ring-fusion methyl, a methyl-substituted ring and a C=C double bond in one ring, C=O in the other
(II) steroid skeleton with R side chain, AcO at C3, a C=C–C=C system and a ketone (C7=O) conjugated in ring B
- Write down the major product of the following reactions :
[Figure]
(I) cyclopentene ring bearing a cis-fused/substituted group (isopropylidene-type tert-alkyl substituents drawn with wedge bonds) $\xrightarrow{(1)\,NBS,\,(2)\,30\%\,NaOH}$ ?
(II) pyridine $\xrightarrow[HCl]{CrO_3}$ ?
(III) cinnamaldehyde ($\mathrm{Ph{-}CH{=}CH{-}CHO}$) $\xrightarrow[EtOH]{NaBH_4}$ ?
(IV) 1-nitrobutane-type nitroalkane ($\mathrm{CH_3CH_2CH_2{-}NO_2}$ drawn as zigzag) $\xrightarrow{(1)\,BuLi,\;(2)\,I{-}\text{alkyl}}$ ? (alkyl iodide drawn as a zigzag chain)
(V) trisubstituted alkene with R group on isopropylidene-type carbon $\xrightarrow[(1\ equiv.)]{SeO_2}$ ?
- (i) Deduce the rotational constant and C - O bond length in carbon monoxide when the first line in the rotational spectrum has a frequency of $3.8424\,\mathrm{cm^{-1}}$.
Given : Avogadro number = $6.022\times10^{23}$
$h = 6.625\times10^{-27}\,\mathrm{cm^2\,g/s}$; $c = 3\times10^{10}\,\mathrm{cm/s}$ [10]
(ii) Calculate the change in the rotational constant, when hydrogen is replaced by deuterium in the hydrogen molecule. [5]
- (i) Calculate the change in energy for a given reaction :
$$\mathrm{HCl + D_2 \longrightarrow DCl + HD}$$
Given the frequencies of vibration of the molecules at $v = 0$, HCl = 2885 $\mathrm{cm^{-1}}$, $\mathrm{D_2}$ = 2990 $\mathrm{cm^{-1}}$, DCl = 1990 $\mathrm{cm^{-1}}$ and HD = 3627 $\mathrm{cm^{-1}}$, $h = 6.625\times10^{-34}\,\mathrm{m^2\,kg/s}$, $c = 3\times10^8\,\mathrm{m/s}$. [10]
(ii) What will be the intensity of the hot band
$v = 1 \to v = 2$ relative to the fundamental
$v = 0 \to v = 1$ in Iodine molecule at temperature 300 K ?
Given : Equilibrium vibration frequency of Iodine molecule = $215\,\mathrm{cm^{-1}}$
Anharmonicity constant $x_e = 0.003$.
$c = 3\times10^8\,\mathrm{m/s}$; $h = 6.625\times10^{-34}\,\mathrm{m^2\,kg/s}$ [10]
- Despite the lower electronegativity of sulphur, thiophene metallates as readily as furan. Why ?