Mains PYQs
UPSC IFoS Mains Chemistry paper 2 2023 questions
- On the basis of Huckel's Rules of aromaticity, identify the following compounds as aromatic, antiaromatic and non-aromatic :
[Figure]
(I) N-methyl three-membered ring (azirine-type, N-CH$_3$ with ring double bond); (II) B-methyl five-membered ring (borole); (III) Si-methyl six-membered ring (silabenzene, Si-CH$_3$); (IV) N-methyl seven-membered ring (azepine, N-CH$_3$); (V) B-methyl seven-membered ring (borepine, B-CH$_3$).
- With the help of the isotopic labelling experiment, how will you establish that $\mathrm{B_{Ac}2}$ mechanism of ester hydrolysis involves true intermediate, not a transition state ?
- Complete the following reaction and identify the products A, B and C.
[Figure]
1-Bromo-2-fluorobenzene with Mg/THF gives [A]; [A] reacts with tetraphenylcyclopentadienone to give B; B on heating ($\Delta$) gives C.
- Compare with proper explanation, the solvolysis behaviour of the following organic compounds :
[Figure]
A: 4-methylbenzyl bromide ($\mathrm{CH_3}$-$\mathrm{C_6H_4}$-$\mathrm{CH_2Br}$); B: 4-tert-butylbenzyl bromide ($\mathrm{(CH_3)_3C}$-$\mathrm{C_6H_4}$-$\mathrm{CH_2Br}$).
- Complete the following reaction. Also indicate the name of the mechanism involved in the formation of product(s).
[Figure]
cis-1,2-dibromoethene (H and Br on each carbon, Br on same side) with $\mathrm{(C_2H_5)_3N}$ gives ?
- Explain why nucleophilic 1,2 shifts are more common than 1,2 electrophilic or free radical shifts.
- Identify A and B in the following reaction :
[Figure]
A cyclohexadiene bearing two OH groups on adjacent sp3 carbons (a cis-5,6-dihydroxycyclohexa-1,3-diene) at 190°C gives [A], then B.
- Arrange the following aldehydes towards their ease of reactivity in Cannizzaro's reaction in the decreasing order :
[Figure]
(I) 4-$\mathrm{CH_3}$-$\mathrm{C_6H_4}$-CHO; (II) 4-$\mathrm{N(CH_3)_2}$-$\mathrm{C_6H_4}$-CHO; (III) 4-$\mathrm{OCH_3}$-$\mathrm{C_6H_4}$-CHO; (IV) 4-$\mathrm{NO_2}$-$\mathrm{C_6H_4}$-CHO
- Cannizzaro's reaction exhibits third order kinetic at low base concentration and fourth order kinetic at higher base concentration. Explain the mechanism of Cannizzaro in the light of above kinetic data.
- Arrange the following molecules in the decreasing order of their epoxidation tendency with reason(s) :
[Figure]
Three stereoisomers of a methyl, chloro and hydroxy substituted cyclohexane ring (I, II, III) differing in wedge/hash orientation of the Cl, CH$_3$ and OH groups.
- Complete the following reaction with mechanism, giving the plausible reasons for product spread :
[Figure]
1-Methylcyclohexan-1-ol (tertiary alcohol on a cyclohexane ring) with $\mathrm{BF_3/OEt_2}$ gives ?
- Give the product(s) of the condensation reaction of 2-butanone with phenylhydrazine along with the mechanism.
- Predict the product(s) of the following reaction. Which product will be major and why ?
[Figure]
Methylenecyclohexane-type ring: cyclohexene with an exocyclic $\mathrm{=CH_2}$ on the carbon adjacent to the ring double bond, treated with HBr.
- Complete the following reactions :
(i) 4-bromoanisole (1-bromo-4-methoxybenzene) with $\mathrm{HNO_3}$ gives ? [3]
(ii) 4-chloroanisole (1-chloro-4-methoxybenzene) with $\mathrm{HNO_3}$ gives ? [2]
[Figure]
- Compare the rate of solvolysis in separate reactions of (i) iodocyclopentane and (ii) 1-iodo-2,4-cyclopentadiene with silver perchlorate in propionic acid.
- Base catalysed bromination of optically active ketone results in racemization of product. How will you account for this observation ?
- Complete the following reaction with mechanism :
[Figure]
Diethyl succinate-type diester ($\mathrm{COOC_2H_5}$ at both ends of a $\mathrm{CH_2CH_2}$ chain) (2 eq.) + $\mathrm{^-OEt}$ gives ?
- Complete the following reaction sequence by writing the structures of A, B and C. Also write the name of the process involved.
[Figure]
cis-5,6-dimethylcyclohexa-1,3-diene type triene (two CH$_3$ groups, H on adjacent sp3 carbons, with a conjugated triene) on heating ($\Delta$) gives A; A $\rightleftharpoons$ B on $h\nu$; B on $\Delta$ gives C.
- Complete the following reactions :
(i) 2,3-dimethylbut-2-ene ($\mathrm{(CH_3)_2C=C(CH_3)_2}$) with $\mathrm{Cl_2}$ gives ?
(ii) $\mathrm{Ph-CH=C=CH_2}$ with HCl/AcOH gives ?
[Figure]
- The following compounds undergo elimination reaction in the presence of $\mathrm{C_2H_5ONa/C_2H_5OH}$ at 55°C. Arrange them in decreasing order of elimination behaviour rate.
(I) $\mathrm{CH_3CH_2Br}$
(II) $\mathrm{(CH_3)_3CBr}$
(III) $\mathrm{CH_3CHBrCH_3}$
(IV) $\mathrm{CH_3CH_2CH_2Br}$
- Indicating the product spread, complete the following pericyclic reaction :
[Figure]
Ethyl acrylate ($\mathrm{CH_2=CH-COOC_2H_5}$) + 2-methoxybuta-1,3-diene ($\mathrm{CH_3O}$ on C2 of the diene), heated ($\Delta$), gives ?
- Butanal reacts with ethyl cyanoacetate in the presence of base. Give the product(s) of this reaction along with mechanism.
- Write the product(s) of the following reactions :
(i) 9-(diphenylhydroxymethyl)fluoren-9-ol type diol (fluorene with C9 bearing OH and a C(OH)Ph$_2$ group) with $\mathrm{H^+}$
(ii) 1-(aminomethyl)cyclopentan-1-ol with $\mathrm{NaNO_2/HCl}$, 0°C
[Figure]
- Predict the product(s) of the following reaction :
[Figure]
Naphthalene with $\mathrm{N_2CH_2COOC_2H_5}$, $\Delta$, gives ?
- Write the product(s) of reaction of 1-chloro-3-phenyl-2-propanone and 1-chloro-1-phenyl-2-propanone $\mathrm{CH_3ONa/CH_3OH}$ separately. Explain the mechanism involved.
- List the following groups of monomers in order of decreasing ability to undergo anionic polymerization and give suitable justification.
[Figure]
(I) 4-nitrostyrene ($\mathrm{NO_2}$-$\mathrm{C_6H_4}$-$\mathrm{CH=CH_2}$); (II) 4-methylstyrene ($\mathrm{CH_3}$-$\mathrm{C_6H_4}$-$\mathrm{CH=CH_2}$); (III) 4-methoxystyrene ($\mathrm{OCH_3}$-$\mathrm{C_6H_4}$-$\mathrm{CH=CH_2}$, printed as $\mathrm{OH_3}$ [?])
- Write the product for the following reaction and offer a suitable explanation for your answer.
[Figure]
cyclohex-2-en-1-ol (wedge OH) with (i) $\mathrm{OsO_4}$/Pyridine (ii) $\mathrm{H_2O}$ gives Product.
- Giving the mechanism complete the following reaction :
[Figure]
$\mathrm{CH_3-CO-CH_2-C(CH_3)=CH_2}$, $h\nu$, hexane gives ?
- Calculate $\lambda_{max}$ values of 2-methoxy-pent-3-en-2-one (A) and 3-methoxy-2-methyl-but-2-enal (B).
- Differentiate between o-xylene and p-xylene using IR spectroscopy.
- Identify the chemically equivalent protons and magnetically equivalent protons in the following compound :
[Figure]
Styrene-type compound: a phenyl ring attached to a $\mathrm{CH=CH}$ unit with two H atoms drawn on the terminal carbons.
- From the data given below, calculate the mass of the parent peak (P) whose daughter peak is 65.
MS (m/z) : 106, P, 65, 46.42, 29, 15
- Write the structure of the complementary base pairs of DNA and show their bonding interactions.
- Complete the following reactions and give their mechanism :
(i) $\mathrm{C_6H_5-CH=CH-CHO + LiAlH_4}$ $\xrightarrow{\mathrm{Et_2O/RT}}$
(ii) cyclohexanone with $\mathrm{SeO_2}$
[Figure]
- Write the products in the following reactions with their mechanisms :
(i) ketone flanked by two CHPh groups each bearing another Ph (1,1,3,3-tetraphenylpropan-2-one) with $h\nu$ gives ?
(ii) cyclohexanone with $h\nu$, ROH gives ?
[Figure]
- Two compounds having molecular formula $\mathrm{C_3H_6O}$ react separately with 2,4-dinitrophenyl hydrazine to give blood red precipitates. Using IR spectroscopy, how would you ascertain the functional group(s) present in the compounds ?
- What is coupling constant in $^1$H NMR spectroscopy ? How does external magnetic field affect coupling constant values ? For two vicinal protons, do we observe same or different coupling constant values and why ?
- Which of the following two compounds will give higher intensity in UV-Vis spectra and why ?
[Figure]
(I) trans-but-2-ene ($\mathrm{H_3C}$ and H on each alkene carbon, $\mathrm{CH_3}$ trans); (II) acetone ($\mathrm{(H_3C)_2C=O}$)
- Write the effect of isotopic substitution on the rotational spectrum of a diatomic molecule.
- Write the product(s) in the following photochemical reaction :
[Figure]
Bicyclic (bicyclo[2.2.2]octane-type) ring bearing a COPh group, $h\nu$, gives ?
- Complete the following reactions sequence :
[Figure]
$\mathrm{Ph-CH=CH_2}$ with n-BuLi in THF gives A; A with $\mathrm{CH_2=CH-CH=CH_2}$ gives B; B with ROH gives C.
- Write the structure of neoprene and its monomer precursor which gives the former by use of Zeigler-Natta catalyst.
- Why is the weight average molecular weight and the number average molecular weight used in polymer chemistry rather than simply measuring molecular weight ? Explain.
- A compound having molecular formula $\mathrm{C_5H_8O_2}$ may be either ethyl acrylate or vinyl propionate. How would you identify the correct compound using IR spectroscopy ?
- Give the mechanism for detection of N-terminal amino acid in a protein with Sanger's reagent.
- A compound gives two signals at $\delta$ 4.3 ppm and $\delta$ 5.7 ppm. If the spectrum is recorded in a 400 MHz NMR machine, write their chemical shift difference in Hz (hertz).
- A compound with molecular formula $\mathrm{C_8H_6}$ gives a product ($\mathrm{C_8H_8O}$) upon treatment with dil. sulphuric acid in the presence of mercurous sulphate. Write approximate $^1$H NMR chemical shifts and multiplicity of the protons in the product.
- Complete the following reactions and give a suitable mechanism for both the steps :
[Figure]
A bicyclic diene (a cyclopentene fused to a methylcyclopentene, with trans-ring-fusion H atoms drawn with hashed bonds) with mCPBA/$\mathrm{CHCl_3}$ gives A; A with $\mathrm{BF_3\cdot Et_2O}$ gives B.
- A compound having molecular formula $\mathrm{C_9H_{12}}$ gives the following MS (m/z) data :
m/z 120, 92, 91, 77 and 51
Write the mass fragmentation of the compound to elucidate the structure of the fragment having mass m/z 92.
- Answer the following, when benzene is treated with an alkali metal in THF as solvent :
(i) The spectroscopy to be used to identify the product.
(ii) The structure of the product.
(iii) Total spin of the product.
(iv) The number of lines observed.
(v) The intensity distribution of the lines.
- A terpolymer is prepared from vinyl monomers A, B and C; the molecular weight of the repeat units are 104, 184 and 128, respectively. A particular polymerisation procedure yields a product with the empirical formula $\mathrm{A_{3.55}\,B_{2.20}\,C_{1.00}}$. Calculate the average unit weight of the polymer.
- A compound with molecular formula $\mathrm{C_5H_6O_3}$ gives the following data :
MS (m/z) 114, 76, 73, 60, 55
IR (cm$^{-1}$) 2981, 1850, 1758, 1250
$^1$H-NMR ($\mathrm{CDCl_3}$) $\delta$ 2.43 (t, 4H), 1.96 (pent., 2H)
$^{13}$C-NMR ($\mathrm{CDCl_3}$) $\delta$ 177, 33, 19.6
Assign the structure to the compound.