Mains PYQs
UPSC IFoS Mains Chemistry paper 2 2019 questions
- In the Cannizzaro reaction of benzaldehyde, suggest a suitable method to know the source of second hydrogen that becomes attached to benzyl alcohol, i.e., if it comes from solvent ($\mathrm{H_2O}$) or from a second molecule of benzaldehyde.
- Neopentyl-type bromide (I) undergoes rearrangement during $\mathrm{S_N}1$ hydrolysis, but no such rearrangement takes place with its phenyl analogue (II). Explain :
[Figure]
(I) Me3C-CH(Br)-Me ; (II) Me2C(Me)-CH(Br)-Ph (as drawn: Me-C(Me)(Me)-CH(Br)-Me and Me-C(Me)(Me)-CH(Br)-Ph)
- Which of the following compounds has the greater dipole moment? Justify your answer :
[Figure]
A: diphenylcyclopropenone; B: benzophenone
- Methyl radical ($\dot{\mathrm{C}}\mathrm{H_3}$) is planar, while trifluoromethyl radical ($\dot{\mathrm{C}}\mathrm{F_3}$) is pyramidal. Justify.
- Indicate what types of sigmatropic reactions are involved in the following transformations :
[Figure]
A spiro[4.4]nonadiene bearing two $\mathrm{CH_3}$ groups, on heat, goes through three successive structures (bicyclic products) as drawn.
- How will you prepare the following compound by Skraup synthesis? Give mechanism for its formation :
[Figure]
Methoxy-substituted quinoline ($\mathrm{H_3CO}$ on the benzo ring)
- Write the product of the following reaction and predict the mechanism :
[Figure]
2-Methylbenzyl-dimethylammonium ion ($\mathrm{ArCH_2N^+H(CH_3)_2}$, Ar bearing $\mathrm{CH_3}$ ortho) with $\mathrm{NaNH_2}$, $\Delta$ gives ?
- Give the product and mechanism of the following reaction :
[Figure]
Cyclohexanone + $\mathrm{Ph_3P^+\text{-}CH^-\text{-}O\text{-}CH_3}$, then HCl, gives ?
- 2-Methylcyclohexanone forms an enolate mixture of varied composition when subjected to the following reaction conditions. Draw the structures of the products and identify the major/minor products :
[Figure]
2-Methylcyclohexanone with $\mathrm{Et_3N/DMF}$ or $\mathrm{NaH/DMF}$ (equilibrating conditions) on one side, and $\mathrm{(C_6H_5)_3C\,Li}$ in $\mathrm{H_3COCH_2CH_2OCH_3}$ or LDA on the other
- 2S,3R-3-Phenyl-2-butyl tosylate (I) yielded largely racemic 3-phenyl-2-butyl acetate on heating in acetic acid solution. In contrast, the 2R,3R-diastereomer (II) was converted to optically active 3-phenyl-2-butyl acetate. Explain :
[Figure]
(I) and (II) drawn as stereo-projections of the 3-phenyl-2-butyl tosylates (substituents Ph, H, $\mathrm{CH_3}$, OTs, $\mathrm{H_3C}$)
- (i) When 2-fluoropentane undergoes an $E1$ reaction, is the major product the one predicted by Zaitsev's rule? Explain. [5]
(ii) Write the structure of the major product formed in the following elimination reaction. Justify your answer : [5]
[Figure]
1-Bromo-2-methylcyclohexane (wedge $\mathrm{CH_3}$, hashed Br) with KOH gives ?
- Comment if the following two compounds will yield same product or different products on treatment with $\mathrm{PCl_5}$. Explain :
[Figure]
(I) and (II): the two geometric (syn/anti) oximes of benzosuberone (benzocycloheptanone oxime)
- (i) Arrange the following compounds in increasing order of their $pK_a$ values. Justify your answer :
1. $\mathrm{CH_2(COMe)_2}$
2. $\mathrm{CH_2(CO_2Et)_2}$
3. $\mathrm{MeCOCH_2CO_2Et}$ [5]
(ii) Complete the following reaction : [5]
[Figure]
1,6-Cyclodecanedione (ten-membered ring diketone) with $\mathrm{OH^-}$ gives ?
- Complete the following conversion by identifying the compounds $X$, $Y$ and $Z$. Briefly mention the type of reaction involved in each step :
[Figure]
2-Amino-3-nitro-6-methoxypyridine (with $\mathrm{NO_2}$, $\mathrm{NH_2}$, $\mathrm{H_3CO}$) + 4-fluorobenzylamine gives $X$; $X$ with $\mathrm{H_2}$/Raney Ni gives $Y$; $Y$ with $\mathrm{ClCO_2Et}$ gives $Z$
- Identify the products and briefly describe the steps involved :
(i) [Figure] 1-(Hydroxydiphenylmethyl)cyclopentanol with $\mathrm{H_2SO_4}$ gives ? [5]
(ii) [Figure] 2-Fluoronicotinamide (pyridine-3-carboxamide with F at 2) with $\mathrm{Br_2}$/KOH gives ? [5]
- (i) In the following reaction, there is a possibility of formation of two isomeric products $Y$. However, one isomer is formed. Identify both the isomers $Y$ and also the structure of the most likely formed product : [5]
[Figure]
2-Methoxybutadiene-type diene (with OMe) + acrylonitrile, Diels-Alder gives $X$; $\mathrm{H^+/H_2O}$ gives $Y$
(ii) Identify the product : [5]
[Figure]
1-Ethynylcyclohexanol with $\mathrm{HgSO_4}$, $\mathrm{H_2SO_4}$, $\mathrm{H_2O}$ gives ?
- Formulate the product(s) and give the mechanism for the following reactions :
(i) Phenol with $\mathrm{CHCl_3}$, Aq. NaOH, $\Delta$ gives ?; then $\mathrm{Ac_2O}$, $\mathrm{Na^+O^-Ac}$, $\Delta$ gives ? [5]
(ii) $\mathrm{2CH_3COOC_2H_5}$ with $\mathrm{EtO^\ominus}$, EtOH gives ? [5]
[Figure]
- Suggest starting materials and conditions to prepare the following molecules based on Fischer indole and Knoevenagel condensation reactions :
(i) [Figure] 2-Phenylindole (N-H, Ph at C2)
(ii) [Figure] 3-Acetylcoumarin ($\mathrm{COCH_3}$ at C3)
- Formulate the products and mechanism of the following reactions :
(i) [Figure] Diethyl adipate-type diester $\mathrm{EtO_2C\text{-}CH_2CH_2\text{-}CH_2CH_2\text{-}CO_2Et}$ as drawn (ester groups on $\mathrm{CH_2CH_2}$ arms from a $\mathrm{CH_2\text{-}CH_2}$ link) with $\mathrm{Na^+\,^-OEt}$, EtOH gives ?
(ii) [Figure] Allyl vinyl-type ketone ($\mathrm{R\text{-}CO}$ attached to a carbon bearing a vinyl and an allyl group) on heating $\Delta$ gives ?
- Write the structures of the products of the following reactions :
(i) [Figure] 4-Nitroaniline with $\mathrm{CuBr_2}$, t-BuONO gives ?
(ii) [Figure] Benzaldehyde with Zn-Hg, Conc. HCl gives ?
(iii) [Figure] 2-Phenylethylamine + benzoyl chloride, 1) Aq. NaOH 2) $\mathrm{POCl_3}$ gives ?
(iv) [Figure] 6-Methylhept-5-en-2-one with Zn, $\mathrm{Br\text{-}CH_2COOEt}$, $\mathrm{Et_2O}$ gives ?; then $\mathrm{Ac_2O}$ gives ?
- A very dilute solution, 0.001 $M$ sugar in water, is separated from pure water by an osmotic membrane. What osmotic pressure develops in atm at $25\,^\circ\mathrm{C}$ ?
- Write the important structural and functional differences between DNA and RNA.
- Calculate the molar mass of a polyisobutylene in $\mathrm{CCl_4}$ solutions at $30\,^\circ\mathrm{C}$. Given $K = 2.6\times10^{-4}$ dL/g, $a = 0.70$ and intrinsic viscosity $[\eta] = 43$ dL/g.
- The following ketone-containing chiral centre undergoes racemization on photolysis. Write down the mechanism :
[Figure]
Ph-CO-CH(Me)... as drawn: PhC(=O)-C(H)(Me)(Ph) with $h\nu$, Norrish Type-I gives ?
- What is anisotropic effect? Explain this effect in aromatic protons.
- Arrange the following cycloalkenes in order of their wave numbers' increasing manner and explain the importance of strain :
[Figure]
Cyclohexene, cyclopentene, cyclopropene, cyclobutene (as drawn, each with a ring double bond)
- How do you prepare the following compounds from cyclohexene? Explain the stereochemistry during their formation :
(i) [Figure] cyclohexane-1,2-diol, cis (both OH hashed)
(ii) [Figure] cyclohexane-1,2-diol, trans (one OH hashed, one bold)
- Complete the following reaction and predict the mechanism :
[Figure]
Cyclopentene with m-CPBA gives ?, then $\mathrm{Me_2NH}$ gives ?
- (i) An unknown organic compound gave the following spectral data :
UV : 280 nm, $\varepsilon_{max} = 20$
IR : 1698 $\mathrm{cm^{-1}}$
PMR ($\delta$, ppm) : 3.4 (s, 3H), 6.6 (2H, d, $J = 8$ Hz), 7.5 (2H, d, $J = 8$ Hz) and 9.5 (1H, s)
Find the structure and explain the data. [5]
(ii) A compound with molecular formula $\mathrm{C_8H_8O}$ gave positive iodoform test and gave the following data :
IR ($\nu_{max}$, $\mathrm{cm^{-1}}$) : 1685
NMR ($\delta$, ppm) : 2.1 (s, 3H), 7.1-7.3 (m, 5H)
Mass (Rel. Abu. %) : $m/z$ 120, 105, 77 and 51
Find the structure and give its mass fragmentation. [5]
- Complete the following reaction and give its mechanism :
$\mathrm{C_6H_5\text{-}CH_2\text{-}CO\text{-}CH_2\text{-}C_6H_5}$ with $h\nu$, Norrish Type-I gives ?
- Identify the products $A$ and $B$ of the following reactions :
(i) [Figure] PhC(=O)-CH2-O-CH(Ph)... as drawn: a phenacyl-type ketone ether (Ph-CO-CH2-O-CH2-Ph with Ph on the CH) with Norrish Type-II gives $A + B$ [5]
(ii) [Figure] Bicyclo[2.2.1]heptan-7-one-type bicyclic ketone with $h\nu$ gives CO + $A$ + $B$ [5]
- (i) Which of the following molecules will show microwave rotational spectrum? Identify it and justify your answer :
$\mathrm{H_2}$, HCl, NO, $\mathrm{N_2}$, CO, $\mathrm{Cl_2}$ [5]
(ii) "DCl and HCl show different spectra." Give reason. [5]
- $\mathrm{^1H\,^{35}Cl}$ has a force constant value of 483.1 $\mathrm{N\,m^{-1}}$. Calculate the fundamental frequency and wave number.
- Diagrammatically show different modes of vibration of $\mathrm{H_2O}$ molecules. Justify whether these are infrared-active or not.
- Identify the product(s) in the following transformations :
(i) [Figure] A bicyclic cyclobutane-fused ketone (methyl and isopropyl substituted, as drawn) with $h\nu$ gives ? [5]
(ii) [Figure] Diphenylcyclopropenone ($\mathrm{Ph}$, $\mathrm{Ph}$ on the ring, C=O) with $h\nu$ gives ? [5]
- (i) How will you distinguish 2-pentanone from 3-pentanone by mass spectroscopy? [5]
(ii) Discuss the mass spectral fragmentation of 4-heptanone. [5]
- Show that $\overline{M}_n = \overline{M}_w$ of the protein solution, when an equal number of protein mixtures containing-
Haemoglobin = 15.5 kg/mol
Ribonuclease = 13.7 kg/mol
Myoglobin = 17.2 kg/mol
are available.
- (i) Predict the odd one among the following :
Terylene, Teflon, Polyethene, Styrene
Justify giving suitable explanation. [5]
(ii) Write the reactants with their structures to produce Nylon-66. [5]
- What are different types of electronic transitions possible when an organic compound is exposed to UV-visible radiation? Explain and calculate the $\lambda_{max}$ values of the following compounds in nm :
(i) [Figure] a tricyclic fused cyclohexene system with a homoannular/ring-fused diene (as drawn)
(ii) [Figure] $\mathrm{H_2C{=}C(CH_3)\text{-}C(CH_3){=}C(CH_3)_2}$ type diene as drawn: $\mathrm{H_3C}$, $\mathrm{CH_3}$, $\mathrm{CH_3}$ and $\mathrm{CH_3}$ on a conjugated diene with $\mathrm{H_2C{=}}$
(iii) [Figure] a bicyclic (decalin-type) ring system with a conjugated diene as drawn
- Discuss the following with suitable examples and give their importance in mass spectrometry :
(i) Metal stable peaks
(ii) Isotopic peaks of halogens and sulphur