Mains PYQs
UPSC IFoS Mains Chemistry paper 1 2019 questions
- (i) Using the internationally accepted naming convention for ligands in an octahedral complex of an element Mn, what name would you give to the following ?
[Figure]
Octahedral Mn centre with ligands Br, CO, CO, CO, $\varphi_2$P and P$\varphi_2$; $\varphi$ is Phenyl group [4]
(ii) Predict the shape of $\mathrm{ICl_4^-}$
Z, Cl = 17
Z, I = 53 [4]
- What oxidant and fuel are generally used in a fuel cell ? Explain the working of Bacon fuel cell.
- Explain the effect of temperature on the distribution of molecular velocities.
- Deduce Nernst heat theorem and show that this forms the basis of third law of thermodynamics.
- Derive Clapeyron equation applicable to sublimation process
$$\log\frac{p_1}{p_2} = -\frac{L}{2.303\,R}\left[\frac{1}{T_1} - \frac{1}{T_2}\right],$$
where L is the latent heat per gm-mole.
- Discuss the principle of the following :
(i) Polarography [4]
(ii) Cyclic Voltammetry [4]
(iii) Given a 50.00 mL of an unknown concentration of Zinc solution (taken in a polarographic cell). To this unstirred solution, the following measures of 0.10 M EDTA solution was added. After each increment of EDTA (titrant), the resultant limiting current was measured at $-1.20$ V versus SCE. [12]
| EDTA (mL) (Titrant) | $i_L$ (mA) (Limiting current) |
|---|---|
| 0.00 | 0.3 |
| 2.0 | 0.231 |
| 4.0 | 0.167 |
| 6.0 | 0.107 |
| 8.0 | 0.052 |
| 10.0 | 0.0 |
| 12.0 | 0.0 |
| 14.0 | 0.0 |
| 16.0 | 0.0 |
Z, Zn = 30
Atomic weight 65
- (i) A refrigerator working at 50% of ideal efficiency is operating with its interior at $0^\circ\mathrm{C}$ in a room at $25^\circ\mathrm{C}$. Estimate (I) energy required to freeze 1 kg of water (initially at zero degree Centigrade), and (II) heat discharged into the room during the process (Latent heat of fusion of ice is $334\,\mathrm{Jg^{-1}}$). [4]
(ii) Deduce an expression for the equilibrium constant for an ideal gas reaction. [6]
- Describe partial molal quantities. Explain Method of Intercepts for determination of partial molal quantities.
- (i) Define Critical Solution Temperature (CST). Write the degree of freedom (F) for the homogeneous phase of two-component CST system. List three examples of upper consolute temperature system. [12]
(ii) The steam distillation of liquid A (Molar mass, $M_A = 112.6\,\mathrm{g\,mol^{-1}}$) is determined to occur at a temperature of $91.3^\circ\mathrm{C}$ when total pressure is 1.0 atm. Calculate the mass of liquid in 100 gm of distillate. The vapour pressure of water at $91.3^\circ\mathrm{C}$ is 539.4 Torr. [8]
(Assume complete miscibility of these liquids and total vapour pressure = 760 Torr.)
- (i) Draw hexagonal and cubic close packed systems (assuming that the atoms/ions are spherical in nature). Calculate the packing efficiency and void volume in each case. [5]
(ii) How many kinds of voids are generated in a hexagonal close packed system ? Calculate the maximum size of an atom/ion that can occupy the octahedral and tetrahedral voids in hexagonal close packed system of $\mathrm{O^{-2}}$ ions. (Radius of $\mathrm{O^{-2}} = R$)
Explain through diagram. [5]
- (i) Deduce translational partition function. [4]
(ii) Calculate the translational partition function for 1 mol of oxygen at 1 atm pressure at $25^\circ\mathrm{C}$. Assume the gas to behave ideally (atomic weight of oxygen = 16; $N_A = 6.023\times10^{23}\,\mathrm{mol^{-1}}$; $k_B = 1.38\times10^{-23}\,\mathrm{JK^{-1}}$; $R = 8.314\,\mathrm{JK^{-1}\,mol^{-1}}$; and $h = 6.626\times10^{-34}\,\mathrm{Js}$). [6]
- (i) Derive the expressions for the critical pressure, critical temperature and critical volume of a Van der Waals gas. [10]
(ii) Deduce an expression for the variation of entropy with temperature at constant volume and pressure. [10]
- (i) Which one of the following species would you expect to have the longest bond length ?
A - $\mathrm{CN^+}$
B - CN
C - $\mathrm{CN^-}$
D - $\mathrm{NO^+}$ [5]
(ii) How many $\sigma$ and $\pi$ bonds are there in tetracyanoethylene molecule ? [5]
- (i) Justify the statement : Instead of being able to describe precise "orbits" of electrons, we can only describe "orbitals". [5]
(ii) Define Hamiltonian Operator. Write the conditions for a physically realistic solution for wave function $\psi$. [5]
- For multilayer physical adsorption (Type-II), describe Brunauer - Emmett - Teller isotherm. Why is BET isotherm nowadays employed extensively for the determination of surface area ?
- Write a brief account on separation of Lanthanides.
- The compound with the empirical formula $\mathrm{CsAuCl_3}$ is diamagnetic having no metal-to-metal bonds.
(i) Is there gold(II) in the compound ? [2]
(ii) Propose a structure for the compound. [6]
Z, Au = 79
- Write the photochemical reaction between $\mathrm{H_2 - Cl_2}$ and $\mathrm{H_2 - Br_2}$ and also write the rate laws. How do you show that the quantum efficiency of $\mathrm{H_2 - Cl_2}$ is very low, whereas that of $\mathrm{H_2 - Br_2}$ is very high ?
- Draw the schematic representation of the mechanism of the function of Cytochrome P- 450 and explain.
- (i) For the reaction of reagent A in solution to give products, the following data were obtained :
| t; min | 0.0 | 9.0 | 12.0 | 14.0 | 18.0 | 20.0 | 24.0 | 30.0 |
|---|---|---|---|---|---|---|---|---|
| log [A] | 0.583 | 0.343 | 0.257 | 0.223 | 0.170 | 0.133 | 0.118 | 0.079 |
Determine the order of the reaction and calculate the value of the rate constant. [10]
(ii) At $25^\circ\mathrm{C}$, the second order rate constant for the reaction
$$\mathrm{I^- + ClO^- \longrightarrow IO^- + Cl^-}$$
is $0.0606\,\mathrm{M^{-1}s^{-1}}$.
If the solution is initially $3.50\times10^{-3}$ M with respect to each other, what will be the concentration of each species present after 300 s ? [10]
- Draw the schematic representation of the mechanism of transport of $\mathrm{K^+}$ by a crown ether type ionophore bearing a carboxylic acid group in the periphery. Explain various stages involved in the process.
- What is Lanthanide contraction ? Explain from the atomic radii of $+3$ cations, two noticeable differences between the lanthanide and actinide series of ions.
- (i) Define Adsorption isotherm. Using simple model of the solid surface, derive an equation for Langmuir isotherm. What happens to the fraction of adsorption sites occupied by adsorbate ($\theta$) at equilibrium in the low and high pressure limit according to the Langmuir isotherm ? [12]
(ii) The volume of $\mathrm{N_2}$ gas (at STP) needed to cover a sample of silica gel with a monomolecular layer is 122 cc/gm. Calculate the surface area of gel. Each nitrogen molecule occupies $15.7\,\text{Å}^2$. [8]
- (i) Give reaction of two compounds containing metal-metal bonds. [5]
(ii) Explain trinuclear clusters and tetranuclear clusters. [5]
- How do you interpret the formation of blue colour and bronze coloured phase separation when an alkali is added to liquefied ammonia ?
- (i) State the special properties of HF and show that it is a good non-aqueous solvent. [10]
(ii) Sketch all possible isomers of
$\mathrm{[Co(NH_3)_2\,(H_2O)_2\,Cl_2]^+}$. [10]
- (i) Explain the difference between trans-influence and trans-effect using appropriate examples. [5]
(ii) Show that all octahedral complexes of nickel(II) must be outer orbital complexes.
Z, Ni = 28 [5]
- Give at least three examples of industrial chemical reactions run in the presence of solid catalysts. Discuss the oxidation of CO on a platinum catalyst.
Why should a good catalyst have moderate values for the enthalpies of adsorption of the reactants ?