Mains PYQs
UPSC IFoS Mains Chemistry paper 1 2016 questions
- Explain why-
(i) the bond angle in $\mathrm{F_2O}$ is smaller than that in $\mathrm{H_2O}$; [5]
(ii) certain substances like CO and $\mathrm{N_2O}$ are associated with residual entropy even at 0 K. [5]
- (i) Assuming that the activation energy and pre-exponential factor are temperature independent, obtain the expression relating the activation energy ($E_a$) and the rate parameters $k(T_1)$ and $k(T_2)$ for the same reaction at temperatures $T_1$ and $T_2$. [5]
(ii) Calculate the ionic strength of a solution that contains $0.01\,\mathrm{mol\,kg^{-1}}$ $\mathrm{H_2SO_4}$ and $0.02\,\mathrm{mol\,kg^{-1}}$ sodium chloride. [5]
- The heat of the reaction
$$\mathrm{Fe_2O_3(s) + 3H_2(g) \rightarrow 2Fe(s) + 3H_2O(l)}$$
at $25\,^\circ\mathrm{C}$ was found to be $-8.4\,\mathrm{kcal}$. What will be the heat of the reaction at $120\,^\circ\mathrm{C}$? The molar heat capacities at constant pressure and at $25\,^\circ\mathrm{C}$ for iron oxide, hydrogen, iron and water are $25.0\,\mathrm{cal\,deg^{-1}\,mol^{-1}}$, $6.9\,\mathrm{cal\,deg^{-1}\,mol^{-1}}$, $6.1\,\mathrm{cal\,deg^{-1}\,mol^{-1}}$ and $18.0\,\mathrm{cal\,deg^{-1}\,mol^{-1}}$ respectively.
- (i) How many crystal systems are there? Name the crystal systems wherein the unit cell axes are mutually perpendicular. Give one example in each case. [5]
(ii) What is the equation for the distance between the planes (110) for a crystal with mutually perpendicular axes? [5]
- Explain the following:
(i) The dipole moment of $\mathrm{CF_4}$ is less than that of $\mathrm{CH_2F_2}$. [5]
(ii) Carbon dioxide has a linear structure whereas sulphur dioxide is a bend molecule. [5]
(iii) The bond order of NO is lower than that of $\mathrm{NO^+}$. Comment on their magnetic behaviour. [10]
- A molecule has only two translational and two vibrational energy levels. Show that the molecular partition function can be written as the product of two partition functions.
- Explain the adsorption theory of catalysis. What are the various steps involved in it? Give one example to support your answer.
- (i) Discuss the principle of polarographic analysis. Explain the meaning and significance of half-wave potential ($E_{1/2}$). If $E_{1/2}$ values of two electroactive species are too close, how can these be separated? [10]
(ii) "Magnetic susceptibility measurements are of little use in structural elucidation of lanthanide complexes." Justify the statement. [10]
- (i) Just define the terms phase, component and degree of freedom involved in the statement of phase rule. [5]
(ii) How many components are there in an aqueous solution of NaCl and KBr? If to this solution KCl and NaBr are added, how many components will be there? [5]
- The 'relaxation time' for a reversible first-order reaction $\mathrm{C \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} D}$ is 100 microsecond and the equilibrium constant is $1.0\times10^{2}$. Find $k_1$ and $k_{-1}$.
- (i) State and explain Einstein law of photochemical equivalence. How is low quantum yield explained? [10]
(ii) The volume of nitrogen gas at 1 atmosphere and 273 K required to cover one gram of silica gel is $0.129\,\mathrm{dm^3}$. Calculate the surface area of the gel if each nitrogen molecule occupies an area of $16.2\times10^{-10}\,\mathrm{m^2}$. (Given $N_A = 6.023\times10^{23}$) [10]
- Consider a galvanic cell that uses the reaction
$$\mathrm{Cu(s) + 2Fe^{3+}(aq) \rightarrow 2Fe^{2+}(aq) + Cu^{2+}(aq)}$$
Given, $E^\circ_{\mathrm{Fe^{3+}/Fe^{2+}}} = +0.77\,\mathrm{V}$ and $E^\circ_{\mathrm{Cu^{2+}/Cu}} = +0.34\,\mathrm{V}$.
(i) Calculate the standard cell potential.
(ii) Obtain the cell potential at $25\,^\circ\mathrm{C}$ that has the following concentration values:
$$[\mathrm{Fe^{3+}}] = 1.0\times10^{-4}\,M;\quad [\mathrm{Cu^{2+}}] = 0.25\,M;\quad [\mathrm{Fe^{2+}}] = 0.2\,M$$
(Given, $F = 96500\,\mathrm{C}$, $R = 8.314\,\mathrm{J\,K^{-1}\,mol^{-1}}$)
- Set up the Schrödinger wave equation (three dimensions). Comment on the nature of the equation and various terms involved. Explain the significance of $\psi$ and $\psi^2$.
- Explain the following briefly:
(i) Fluorescence [5]
(ii) Chemiluminescence [5]
- Explain the following terms:
(i) Chelate effect [5]
(ii) Lability [5]
- Explain why-
(i) the absorption spectra of actinides (ions) are independent of the nature of the ligand attached to them; [5]
(ii) $\mathrm{Co^{2+}}$ salts are stabler than those of $\mathrm{Co^{3+}}$ salts, but solutions of $\mathrm{Co^{2+}}$ complexes get readily oxidized to $\mathrm{Co^{3+}}$ complexes. (At. No. of Co is 27) [5]
- (i) Draw neat diagrams of the shapes of $d$-orbitals. [5]
(ii) Explain the pattern of splitting of $d$-orbitals in a square-planar ligand field. Label each energy level. [5]
- (i) Explain crystal field stabilization energy (CFSE). What are the factors that affect its magnitude? [10]
(ii) Calculate CFSE and magnetic moments in case of
$$\mathrm{FeCl_3\cdot 6H_2O}\quad\text{and}\quad \mathrm{K_4Fe(CN)_6}$$ [10]
- (i) Write the general expressions for the filling of electrons in $4f$ and $5f$ block elements. [5]
(ii) What do you understand by 'lanthanide contraction'? How does it affect the chemistry of $4f$ and $5d$ block elements? [5]
- (i) Write the IUPAC nomenclature of the following:
(1) $\mathrm{K_3[Fe(CN)_5\cdot NO]}$
(2) $\mathrm{[Co(NO_2)_3\cdot(NH_3)_3]}$ [5]
(ii) Why $\mathrm{Ce^{3+}}$ ion ($4f^1$) is colourless, whereas $\mathrm{Ti^{3+}}$ ($3d^1$) solution is purple in colour? [5]
- (i) What are carbonyls? How are they formed? Show that the molecule $\mathrm{Ni(CO)_4}$ has a tetrahedral structure. [10]
(ii) Write the structure of $\mathrm{Fe_2(CO)_9}$. Show that each iron atom in the structure conforms to the $18e$ rule. [10]
- Describe the structural features of 'ferredoxin' molecule. What is its role in photosynthesis?
- Draw labelled structures of all the possible isomers of dichloro-bis(ethylenediamine) cobalt(III) ion. Does a meso-form exist? Give reason to support your answer.
- (i) Discuss the solvent behaviour of liquid $\mathrm{NH_3}$ in respect of the following:
(1) Alkali metals
(2) Urea
(3) $\mathrm{BF_3}$
(4) Amides ($-\mathrm{NH_2}$)
(5) $\mathrm{Zn(NH_2)_2 + 2NH_4Cl}$ [10]
(ii) What is 'superacid'? Give two chemical properties to justify this nomenclature. [10]
- (i) Starting with $\mathrm{[PtCl_4]^{2-}}$, prepare diamine dichloroplatinum(II). Name the isomer formed. [4]
(ii) Choose the relevant starting material and write all the steps to get the other geometrical isomer of the above product. [6]
- (i) What do you understand by an 'oxidative addition' reaction? [5]
(ii) How does it differ from an 'insertion reaction'? Give example in each case. [5]