Mains PYQs
UPSC Mains Chemistry paper 2 2026 questions
- (i) Draw the structures of three possible geometrical isomers of [10] annulene and explain the aromaticity. [5]
(ii) Explain the aromaticity of sydnone and tropolone. [5]
- Through a proper mechanism, explain the difference in the reactivity of M and N in the following solvolysis reactions.
Reaction 1 [5]: [Figure] M (7-substituted norbornene with H and OTs on the bridge carbon, alkene on the syn side) with CH3COOH gives the 7-OAc product.
Reaction 2 [5]: [Figure] N (7-substituted norbornene with TsO and H on the bridge carbon, alkene on the other side) with CH3COOH gives a bicyclic cyclopentene-fused cyclobutane acetate.
- Identify the major products V, W, X, Y and Z in the following reaction sequences: [5×2=10]
[Figure] benzene + benzoyl chloride, AlCl3, excess benzene → V
[Figure] chlorocyclopentane, (i) PPh3 (ii) BuLi → W; W + V → X; X, OsO4 (cat.), NMO, tBuOH, H2O → Y; Y, H2SO4 → Z
- The following reaction gives two products X and Y:
[Figure] Ph-C≡C-CH3, HCl, Al2O3 → X (Cl and Ph on one alkene carbon, H and CH3 on the other; Cl top left, Ph bottom left, H top right, CH3 bottom right) + Y (Ph top left, Cl bottom left, H top right, CH3 bottom right)
(i) Assign E/Z configuration to the products X and Y. [5 with (ii)]
(ii) Between X and Y, identify the kinetic and thermodynamic products.
(iii) Under the reaction conditions, the kinetic product slowly gets converted to a thermodynamic product, until the equilibrium is reached. Propose a probable mechanism for this conversion. [5]
- (i) Write the structures of two products formed in the following cycloaddition reaction, and mention the major and minor product with justification: [5]
[Figure] 2-pyranone-type ring (ring O with two C=O, drawn as a dione) + o-quinodimethane (benzocyclohexadiene with two exocyclic CH2), heat
(ii) How may the following conversion be carried out ? Draw the structures of transition state for both the products. [5]
[Figure] 1,3-butadiene-type diene → cyclobutene (square with vertical line) + cyclobutene (square with diagonal line)
- Write the structures of the major products M, N, O, P and Q formed in the following reaction sequence:
[Figure] 4-bromonitrobenzene (NO2 and Br para); Sn/HCl → M; M, (i) NaNO2/HCl 0-5°C (ii) CuCN → N; 4-bromonitrobenzene, ⊖CN → O; O, (i) SOCl2 (ii) NH3 → P; P, (i) Br2/NaOH, Δ (ii) H2O → Q
- (i) Write the products formed in the following reaction along with the mechanism of their formation. [5]
[Figure] benzaldehyde, conc. NaOD in D2O
(ii) Which one of the following two compounds, Y and Z, can undergo elimination reaction under E2 conditions ? Explain. [5]
[Figure] Y: cyclohexane with CH3 (wedge), Br (hashed) and CH3 (wedge); Z: cyclohexane with CH3 (wedge), Br (wedge) and CH3 (wedge)
(iii) Write the major products M and N formed in the following reactions: [5]
[Figure] methyl vinyl ketone, NaCN, HCN, 5°-10°C → M
[Figure] mesityl oxide (4-methylpent-3-en-2-one), PhSH, 25°C → N
- Intermediate [A] is formed in the following reaction:
CHCl3 + tBuOK → [A]
(i) Identify the intermediate [A]. [2]
(ii) Write the products of the following reactions with the correct stereochemistry. [5]
Reaction 1: [Figure] cis-2-butene, [A]
Reaction 2: [Figure] trans-2-butene, [A]
(iii) Are reactions 1 and 2 stereospecific or stereoselective ? [3]
(iv) Write the structure of the major product formed in the following reaction: [5]
[Figure] phenol, (i) NaOH (ii) [A], 70°C (iii) H+
(v) Write the major product formed in the following reaction: [5]
[Figure] 4,5,6,7-tetrahydroindane (cyclopentene-fused cyclohexene), [A] (one equiv.)
- (i) Write the structure of the major products of the following reaction and write the mechanism of their formation: [5]
H3C-C(=O)-H + H-C(=O)-H (excess), aq. NaOH
(ii) Write the structures of the major products X and Y formed in the following reaction sequence. Provide a mechanism for the conversion of X to Y. [10]
[Figure] hexane-2,5-dione-type aldehyde-ketone (H-C(=O)-CH2CH2-C(=O)-CH3 as drawn, one aldehyde and one methyl ketone), (i) aq. NaOH (ii) CrO3, H2SO4 → X [C6H8O2]; X, PhNHNH2, acetic acid, Δ → Y
- Write the structures of the major products M, N, O and P in the following reaction sequence. Suggest a mechanism for the conversion of O to P. [15]
[Figure] 2,6-dimethylphenol; (i) K2CO3 (ii) CH3COCl → M; M, hν → N; 2,6-dimethylphenol, (i) NaH (ii) (E)-1-bromopropene (H3C and H on one carbon, H and Br on the other) → O; O, Δ 220°C → P
- (i) Write the structures of the products formed in the following reactions. Which one of these two reactions would proceed faster ? Justify your answer. [10]
Reaction 1: [Figure] bromobenzene, NaNH2, NH3 (l)
Reaction 2: [Figure] 2,6-dideuterobromobenzene (D on both carbons ortho to Br), NaNH2, NH3 (l)
(ii) Write the structures of the major products X and Y formed in the following reaction sequence. Write a suitable mechanism for the formation of Y from X. [10]
[Figure] N-benzyl benzo-fused azocane (eight-membered ring with N bearing CH2Ph), MeI → X; X, NaNH2, NH3 (l) → Y
- (i) Write the structure of the stereochemical product formed in the reaction of (2E, 4E)-hexa-2,4-diene under photochemical conditions and explain using the FMO approach. [10]
(ii) Identify the major product with correct stereochemistry in the following sigmatropic rearrangement: [5]
[Figure] 5,6-dimethylcyclohexa-1,3-diene-type ring (Me wedge on one carbon, Me hashed on the adjacent carbon), Δ
- (i) Write the product(s) of the following sigmatropic rearrangement and explain using the FMO approach: [10]
[Figure] isopropylidene-type cyclopentane (cyclopentane with exocyclic C=C bearing Me and Me), hν
(ii) Write the major product showing correct stereochemistry of the following cycloaddition reaction: [5]
[Figure] 1-methoxycyclopentadiene + methyl vinyl ketone (CH2=CH-COCH3), Δ
- (i) Write the structures of the major products E and F of the following reaction sequence. Write the mechanism of formation of F from E. [10]
[Figure] dicyclohexyl ketone, Br2 (1 equiv.), CH3COOH → E; E, KOH → F
(ii) Consider the reaction given below: [5]
[Figure] alkene R1R2C=CR3R4, Br2, MeOH → R1R2C(OMe)-C(Br)R3R4
Write the order of increasing reactivity of the following alkenes towards the above reaction.
[Figure] 1: 2-methylpropene (Me, Me on one carbon, =CH2); 2: (E)-2-butene; 3: α-methylstyrene (Ph, Me, =CH2); 4: CH2=CH2
(iii) Write the major products formed in the following reactions: [5]
Reaction 1: [Figure] indole (N-H), (i) nBuLi (ii) CO2 (iii) H+
Reaction 2: [Figure] indole (N-H), (i) nBuMgBr (ii) CO2 (iii) H+
- Proteins are dynamic molecules rather than static structures. Explain this phenomenon using hemoglobin as an example.
- Write the structure of the major product indicating the stereochemistry and mechanism of the following reactions:
[Figure] cyclopentene ring bearing a wedge isopropyl-type group and a wedge (bold) substituent on the other ring carbon; left arrow m-CPBA, right arrow (i) NBS (ii) 30% NaOH
- Explain why 2-methyl benzophenone undergoes rapid and reversible photo-enolisation reaction. Discuss the stereoisomerism of the photo-enol formed.
- (i) How can the following pairs of compounds be distinguished based on the vibrational frequencies of their >C=O and >N-H bonds ? [5]
[Figure] ethyl benzoate and phenyl propanoate
[Figure] 4-bromo-N-methylbenzamide and N-(4-bromophenyl)acetamide
(ii) Using the Woodward-Fieser rules, calculate the $\lambda_{\mathrm{max}}$ values of the following compounds: [5]
[Figure] a tricyclic polycyclic diene (methyl-substituted, fused ring system with a conjugated diene) and its conjugated enone analogue bearing a C=O
- (i) Explain and compare the chemical shifts of hydrogens in $^1$H NMR spectra of ethene and ethyne. [5]
(ii) Write the mechanism of rearrangement of benzyl cation to tropylium cation in mass spectrometry. [5]
- Write the structures of the products formed in the following reactions: [2×5=10]
(i) [Figure] cyclohex-2-enone, NaBH4/CeCl3, MeOH
(ii) [Figure] cyclohex-2-enone, Na/NH3 (l)
(iii) [Figure] EtO2C-CH2-CH(Me)-CH2-CO2H, (i) B2H6 (ii) H+
(iv) [Figure] EtO2C-CH2-CH(Me)-CH2-CO2H, (i) LiAlH4 (ii) H+
(v) [Figure] N-benzyl-4-(methoxycarbonyl)pyrrolidin-2-one (lactam O=C, N-CH2Ph, CO2Me), B2H6, THF
- (i) How are nylon 6 and nylon 6,6 prepared ? [5]
(ii) If 20 g of polyethylene was completely burnt in the presence of excess air, how many moles of CO2 will be produced ? [5]
(iii) Why is polystyrene brittle in nature, while polyethylene is flexible ? Explain. [5]
(iv) Why is Teflon chemically inert, while PVC is reactive at high temperatures ? Explain. [5]
- (i) How do the physical properties of natural rubber differ from gutta-percha ? Explain. Also write the structures of both the polymers. [10]
(ii) What are nucleic acids ? Give a schematic diagram for the primary structure of a nucleic acid. [10]
- (i) What are the phenomena that result in the emission wavelength being longer than the excitation wavelength in photochemical reactions ? [5]
(ii) Why is phosphorescence slower than fluorescence ? Explain. [5]
- (i) Complete the following Norrish Type I reaction: [10]
$\mathrm{C_6H_5{-}CH{-}C(=O){-}CH{-}C_6H_4CH_3(4)}$ with $\mathrm{C_6H_5}$ on the first CH and $\mathrm{C_6H_4CH_3(4)}$ on the second CH, $h\nu$
(ii) Do Norrish Type II reactions proceed through singlet state and/or triplet state ? Justify your answer with two different examples. [10]
- Write the structure of the major product formed in the following reactions and provide the mechanism: [4×5=20]
(i) [Figure] methyl 3-formylbenzoate (COOCH3 and CHO meta), NaBH4, EtOH
(ii) [Figure] 4-tert-butylcyclohexanone (chair, C=O at top right, tert-butyl at left, H axial), (i) LiAlH4 (ii) H2O
(iii) [Figure] anisole, Na, NH3 (l), ether, ethanol
(iv) [Figure] alkene H(R)C=C(Me)Me, SeO2
(v) [Figure] 2-cyano-1,4-dihydroxybenzene (OH at 1 and 4, CN at 2), Pb(OAc)4
- (i) Calculate the rotational constant of a diatomic molecule if the moment of inertia is $13.97 \times 10^{-47}\,\mathrm{kg\,m^2}$. (Given : Planck's constant $h = 6.626 \times 10^{-34}\,\mathrm{Js}$ and velocity of light $c = 2.998 \times 10^{8}\,\mathrm{ms^{-1}}$) [5]
(ii) Arrange the following molecules in increasing order of vibrational frequency ($\mathrm{cm^{-1}}$): [5]
HF, HI, NO, CO
(iii) Explain the specific vibrational frequencies (>C=O and -OH) in pentane-2,4-dione and 2-hydroxypropiophenone. [5]
- (i) Discuss the spin-spin interactions and coupling constants in $^1$H NMR spectrum of furfuraldehyde. [5]
(ii) Distinguish between (A) anthracene and phenanthrene, and (B) pure ethanol and ethanol in presence of trace amount of acidic impurity, based on $^1$H NMR spectra. [5]
(iii) How can you differentiate between 2-nitroacetophenone and 3-nitroacetophenone based on approximate chemical shifts and spin-spin interactions ? (Consider only ortho-coupling) [5]
- (i) Explain the effect of conjugation on $\lambda_{\mathrm{max}}$ and intensity due to n-$\pi^*$ and $\pi$-$\pi^*$ transitions in 3-buten-2-one compared to acetone. [5]
(ii) Explain the formation of charge-transfer complex between (A) picric acid and anthracene, and (B) tetracyanoethylene and aniline, using electronic spectroscopy. [5]
(iii) Identify the molecular ion peak(s) and peaks due to McLafferty rearrangement in the mass spectrum of ethyl 4-chlorobenzoate. [5]
(iv) Write the structures of ions at m/z 108, 93, 78, 77 and 65 in the mass spectrum of anisole. [5]