Mains PYQs
UPSC Mains Chemistry paper 2 2025 questions
- (i) Tropolone is aromatic, but fulvene is non-aromatic. Why?
(ii) Explain with example pseudo-aromaticity.
- Identify the missing reagent and intermediates in the following chemical conversion:
[Figure]
Acetylcyclohexane (cyclohexyl methyl ketone) $\xrightarrow[0\,^\circ\mathrm{C}\,(-\mathrm{POCl_3})]{\mathrm{PCl_5}} M \xrightarrow[\text{Heat}]{1)\ 3\ \text{equiv. } \mathrm{NaNH_2}\ \ 2)\ \mathrm{HA}} N \xrightarrow[\mathrm{C_2H_5Br}]{\mathrm{NaNH_2}} O \xrightarrow{P}$ cyclohexyl-CH=CH-$\mathrm{CH_2CH_3}$ (alkene, H and cyclohexyl on one carbon, H and $\mathrm{CH_2CH_3}$ on the other, as drawn)
- Write the structure of the major product when neomenthyl chloride is reacted with sodium ethoxide in ethanol. Justify your answer:
[Figure]
Neomenthyl chloride (cyclohexane ring with $\mathrm{H_3C}$, $\mathrm{CH(CH_3)_2}$ and Cl substituents) $\xrightarrow{^-\mathrm{OEt}}$ ?
- (i) Discuss in detail how the reaction of a carbene with $cis$-2-butene can be used to define the spin state (S/T) of carbene.
(ii) $para$-Bromophenol on reaction with $\mathrm{NaNH_2/NH_3}\,(l)$ followed by acidic workup yields one major product. Explain the reaction by writing the steps involved.
- With example, elucidate the permanent and temporary denaturation of a protein.
- (i) In the presence of sodium ethoxide, the following transformation occurs. Explain:
[Figure]
Cyclopentanone with methyl and ester ($\mathrm{CO_2Et}$) on the same ring carbon $\xrightarrow{1)\ \mathrm{NaOEt}\ \ 2)\ \mathrm{HCl}}$ cyclopentanone with methyl and ester on different ring carbons (as drawn)
(ii) Propose a suitable mechanism for the following transformation:
[Figure]
Epoxide with a chain bearing two alkenes $\xrightarrow[\mathrm{H_2O}]{\mathrm{H_2SO_4}}$ bicyclic decalin diol (OH on one ring, HO and gem-dimethyl on the other)
- (i) The following reaction does not produce the product shown:
[Figure]
3,3-Dimethyl-1-butene $\xrightarrow[\mathrm{H_2O}]{\text{Cat. }\mathrm{H_2SO_4}}$ (crossed out) 3,3-dimethyl-2-butanol
(1) Predict the major product from the conditions shown above, and write a detailed mechanism for its formation.
(2) Write that reaction conditions which would lead to successful synthesis of the product shown above (i.e., 3,3-dimethyl-2-butanol). [10]
(ii) Write the structure of the major product(s) formed in the following reaction. Justify your answer:
[Figure]
$\mathrm{Ph}$-CH=$\mathrm{CH_2}$ $\xrightarrow[h\nu]{\mathrm{BrCCl_3}}$ ? [5]
- Write the structure of the major product(s) formed in the following reactions:
[Figure]
(i) 2-(3-oxopentyl)cyclohexanone $\xrightarrow{1)\ \mathrm{KOH}\ \ 2)\ \mathrm{HA}}$ ?
(ii) Bicyclic amine (quinuclidine type) carrying C(OH)Ph-C(OH)Ph $\xrightarrow{\mathrm{H^+}}$ ?
(iii) Benzocycloheptenone (ketone on a seven-membered ring fused to benzene) $\xrightarrow{1)\ \mathrm{NH_2OH}\ \ 2)\ \mathrm{Al_2O_3}}$ ?
(iv) Triester ($\mathrm{EtO_2C}$, $\mathrm{CO_2Et}$ on one carbon, $\mathrm{CO_2Et}$ on the chain, with a methyl branch) $\xrightarrow{^-\mathrm{OEt}}$ ?
- (i) Write the structure of the product formed in the following reactions:
[Figure]
(1) 2-Bromocyclohexanone $\xrightarrow{^-\mathrm{OMe}}$ ?
(2) $cis$-2-Butene $\xrightarrow[\mathrm{NEt_3}]{\mathrm{EtO_2C\text{-}NH\text{-}OSO_2\text{-}C_6H_4\text{-}NO_2\ (in\ excess)}}$ ? [10]
(ii) Describe the synthesis of ketone (A) when only isobutanol is available as the starting material:
[Figure]
Ketone A (2,6-dimethyl-4-heptanone, as drawn) [5]
- (i) Write the steps involved in the following conversion:
[Figure]
$\mathrm{Cl\text{-}CH_2\text{-}CO_2{}^tBu}$ + ethyl acrylate $\xrightarrow{{}^t\mathrm{BuOK}}$ cyclopropane bearing two $\mathrm{CO_2{}^tBu}$ groups (wavy bond stereochemistry) [10]
(ii) Elucidate the structure of C and D in the following conversion:
[Figure]
$\mathrm{HO_2C(CH_2)_6CO_2H} \xleftarrow{1)\ \mathrm{O_3}\ \ 2)\ \mathrm{HOAc}} C\ (\mathrm{C_8H_{12}}) \xrightarrow{\mathrm{H_2/Pt}} D\ (\mathrm{C_8H_{16}})$ [5]
- (i) Provide the structure of missing reagents and intermediates in the following synthesis:
[Figure]
Isoamyl-type alcohol (as drawn) $\xrightarrow{M}$ aldehyde $\xrightarrow{N} O \xrightarrow{P}$ amino alcohol (CH(OH) next to $\mathrm{CH_2NH_2}$) [10]
(ii) Write the structure of the product formed and the steps involved in the following reaction:
[Figure]
Bicyclo[2.2.2]octanone with a diazonium group ($\mathrm{N_2^+}$) alpha to the ketone $\xrightarrow[\mathrm{MeOH}]{h\nu}$ ? [10]
- (i) After polymerization of $p$-hydroxybenzoic acid, IR analysis shows 0.2% unreacted $\mathrm{-COOH}$. Calculate the molecular weight of the polymer and categorize it. [7]
(ii) Write the structure of the polymer formed when $p$-hydroxybenzoic acid is polymerized. [3]
(iii) What is the precursor of the main component of natural rubber? Draw the structures of both monomer and polymer. [5]
- (i) Compare the salient properties of Nylon 6 and Nylon 6,6. [5]
(ii) How would you prepare syndiotactic polystyrene? [5]
(iii) What are the salient features of alpha helix in regards to handedness, residues per turn and elongation per residue? What are the principal stabilizing factors for an alpha helix? [5]
- (i) Compounds 1 and 2 on reaction with $\mathrm{NaN_3}$ yield same product but compound 1 reacts at room temperature while compound 2 reacts at 200 °C. Identify the product formed and explain the reasons for different reactivities of compounds 1 and 2:
[Figure]
Compounds 1 and 2: sulfur-bridged bicyclic dichlorides (S bridge, two Cl and two H substituents on chair-like skeletons), labelled 1 and 2 [10]
(ii) Identify the major product in the following reactions and justify your answer:
[Figure]
$Q \xleftarrow{1)\ \mathrm{LDA/THF}\ \ 2)\ \mathrm{D_2O}}$ cyclohexyl ethyl ketone $\xrightarrow{1)\ \text{Excess } \mathrm{NaOH}\ \ 2)\ \mathrm{D_2O}} P$ [10]
- Write the structure of the product(s) and the intermediate formed in the following reaction:
[Figure]
$\mathrm{Cl_2CH\text{-}COCl} \xrightarrow[2)\ \text{Cyclopentadiene, Heat}]{1)\ \mathrm{Et_3N}}$ ?
- Deduce the structure of the starting material (A) and all the intermediates formed in each step that would lead to the formation of the following product through the defined reactions:
[Figure]
$A \xrightarrow{1)\ \mathrm{NaNH_2,\ EtI}\ \ 2)\ \text{Lindlar's cat., }\mathrm{H_2}\ \ 3)\ \mathrm{NBS,\ ROOR,\ \Delta}\ \ 4)\ \mathrm{NaOMe,\ MeOH}}$ product: CH(OMe)-CH=CH-$\mathrm{C(CH_3)_3}$ type alkene (methyl ether, tert-butyl end, as drawn)
- A photochemical reaction takes place through $T_1$ state. $S_0\text{-}S_1$ and $S_0\text{-}T_1$ energy gaps correspond to 290 nm and 450 nm, respectively. To get an efficient photochemical reaction should we use light of 290 nm or 450 nm? Give your answer presenting the relevant Jablonski diagram.
- (i) Which of the following molecules is/are active to rotational spectroscopy and why?
$\mathrm{CH_4}$, $\mathrm{H_2O}$, $\mathrm{NH_3}$, $\mathrm{BCl_3}$, $\mathrm{XeF_4}$ [5]
(ii) The spacing between lines in the microwave spectrum of CO decreases by substituting $^{12}\mathrm{C}$ by $^{13}\mathrm{C}$. Why? [5]
- (i) In a 100 MHz NMR instrument, a particular set of protons absorbs at $\delta = 3.0$ with $J = 4.5$ Hz. Find the chemical shift (in Hz) and the coupling constant $J$ in a 500 MHz instrument for the same set of protons. [5]
(ii) The mass spectrum of $n$-butyl phenyl ketone ($\mathrm{C_6H_5COCH_2CH_2CH_2CH_3}$) shows peaks at $m/z$ 162, 120, 105 and 85. Predict the fragmentation pattern. [5]
- (i) Elucidate the structure of the product and the intermediate (if any) in the following reactions:
[Figure]
(A) Chiral half-ester ($\mathrm{EtO_2C}$ and $\mathrm{CO_2H}$ ends, H and Me stereocentre as drawn) $\xrightarrow{1)\ \mathrm{BH_3}\ \ 2)\ \mathrm{H^+}}$ ?
(B) Cyclohexyl-CH=CH-CHO $\xrightarrow{\mathrm{NaBH_4}}$ ? [5+5=10]
(ii) Describe the role of NMO during the dihydroxylation of an alkene using catalytic amount of $\mathrm{OsO_4}$ in the presence of N-methylmorpholine N-oxide (NMO). [5]
- (i) Calculate the frequency of radiation required for a transition of $J=4$ to $J=5$ in the rotational spectrum of HCl. The rotation constant $B = 10.6\,\mathrm{cm^{-1}}$. [5]
(ii) The fundamental vibrational frequency of HCl is $2990\,\mathrm{cm^{-1}}$. Calculate the fundamental vibrational frequency of DCl assuming the same bond strength. [5]
(iii) The molecular formula of a compound is $\mathrm{C_3H_3N}$. The IR absorption frequencies are $1650\,\mathrm{cm^{-1}}$, $2250\,\mathrm{cm^{-1}}$ and $3100\,\mathrm{cm^{-1}}$. Assign a structure for the compound. [5]
- (i) Write the mechanism for the following photochemical transformation:
[Figure]
Benzene $\xrightarrow{h\nu}$ fulvene (methylenecyclopentadiene) [5]
(ii) Photobromination of cinnamic acid was carried out by using light of wavelength 480 nm with a light intensity of $1.5\times10^{-3}\,\mathrm{J\,s^{-1}}$. An exposure of 10 minutes showed a decrease of 0.05 millimole of $\mathrm{Br_2}$. Calculate the quantum yield assuming that 80% of radiation is absorbed by cinnamic acid.
(Planck's constant $h = 6.627\times10^{-34}\,\mathrm{J\,s}$ and velocity of light $c = 3\times10^{8}\,\mathrm{m\,s^{-1}}$) [5]
(iii) Predict the major and minor products for the following photoreaction. Give the logic:
[Figure]
Ketone $\mathrm{CH_3C(=O)CH_2CH(CH_3)CH(CH_3)_2}$ type (two $\mathrm{CH_3}$ on the carbon next to $\mathrm{CH}$, as drawn) $\xrightarrow{h\nu}$ ? [5]
(iv) Assign A, B and C in the following reaction:
[Figure]
$\mathrm{Ph_2CH\text{-}CO\text{-}CHPh_2} + \mathrm{PhCH_2\text{-}CO\text{-}CH_2Ph} \xrightarrow{h\nu} A + B + C + \mathrm{CO}$ (C major) [5]
- (i) Acetone shows a weak absorption at 280 nm and a strong absorption at 190 nm in the UV spectrum. Account for the observation. [5]
(ii) Using Woodward-Fieser rules, calculate $\lambda_{\max}$ for the following compounds:
[Figure]
A: acyclic enone (as drawn); B: 2-cyclohexylidenecyclohexanone; C: 1-acetylcyclopentene; D: methyl-substituted bicyclic dienone (octalone type with extra ring alkene) [10]
- (i) Rank the following dienes in order of increasing reactivity in a Diels-Alder reaction (1 = least reactive, 4 = most reactive). Briefly explain your answer:
[Figure]
A: bicyclic diene with two exocyclic ring double bonds (tetrahydronaphthalene type); B: 1,3-butadiene as drawn (s-trans); C: 1,3-butadiene as drawn (s-cis); D: 1,3-cyclohexadiene [10]
(ii) Write the structure of the product in the following reaction:
[Figure]
2-Methoxy-1,3-butadiene-type diene + acrylonitrile $\xrightarrow{1)\ \text{Heat}\ \ 2)\ \mathrm{H^+,\ H_2O}}$ ? [5]
- (i) Write the structure of the product formed in the following sigmatropic rearrangement and categorize it with suitable explanation. Explain the thermal feasibility of this rearrangement by drawing orbital diagram:
[Figure]
$cis$-Divinylcyclopropane (cyclopropane with H, H, a vinyl group bearing Bu and a second vinyl group) $\xrightarrow[\mathrm{CCl_4}]{80\,^\circ\mathrm{C}}$ ? [10]
(ii) (1) Identify the mode of ring closure for each of the following electrocyclic reactions:
[Figure]
(A) 1,3-cyclooctadiene-type triene $\xrightarrow{\Delta}$ bicyclo[4.2.0] with cyclobutene (H, H wavy)
(B) Cyclic triene fused to cyclopentane $\xrightarrow{\Delta}$ cyclohexadiene fused bicycle with H, H
(2) Are the indicated hydrogens $cis$ or $trans$? [10]
- (i) Estimate the expected splitting (coupling constant $J$ in Hz) for the lettered protons in the $^1$H NMR spectrum of the following compounds:
[Figure]
(1) A: alkene with $\mathrm{H^a}$ and $\mathrm{H^b}$ on one carbon, Br and Cl on the other
(2) B: alkene with $\mathrm{H^a}$, Cl on one carbon and Cl, $\mathrm{H^b}$ on the other
(3) C: $\mathrm{H^a\text{-}C{\equiv}C\text{-}CH_2^b\text{-}Cl}$
(ii) Compare the chemical shifts of the labelled protons $\mathrm{H^a}$ and $\mathrm{H^b}$ in the $^1$H NMR spectrum of the following compounds and justify your answer:
[Figure]
D: $\mathrm{CH_2{=}CH\text{-}OCH_3}$ with $\mathrm{H^a}$ labelled; E: $\mathrm{CH_2{=}CH\text{-}COCH_3}$ with $\mathrm{H^b}$ labelled [10]
(iii) Count the number of peaks observed in the $^1$H NMR spectrum of the following compounds. Justify your answer:
[Figure]
(1) 2-Chlorobutane (as drawn, wedge to Cl)
(2) Cyclohexadiene ring with two methyl groups, one wedged (as drawn) [5]
- (i) A halogenated ester shows $M^+$ peak at $m/z$ 166 (10%) and $M+2$ peak at $m/z$ 168 (9.8%) in mass spectrum. $^1$H NMR spectrum of this compound shows two triplets and a singlet at $\delta$ 2.9, 3.6 and 3.8 ppm, respectively, in the intensity ratio 1:1:1.5. Deduce the structure of the compound. Justify your answer. [10]
(ii) Two isomeric alkenes with same molecular formula $\mathrm{C_6H_{12}}$ show strong peaks at $m/z$ 42 and 56 in the mass spectrum. Propose fragmentation pattern for both the peaks. [5]
- (i) (1) Phthalic acid diethyl ester shows a characteristic peak at $m/z$ 149 in the mass spectrum. Account for the observance of this peak by fragmentation pattern.
(2) The mass spectrum of ethylbenzene shows a characteristic peak at $m/z$ 91 while $n$-propylbenzene shows strong peak at $m/z$ 92. Explain with the help of fragmentation pattern. [10]
(ii) An unknown organic compound with molecular formula $\mathrm{C_4H_5NO_2}$ displays a band at $2250\,\mathrm{cm^{-1}}$ and a strong band at $1740\,\mathrm{cm^{-1}}$ in the IR spectrum. The compound shows only two signals in 3:2 ratio in the $^1$H NMR spectrum. Find out the structure of the compound. Justify your answer. [10]