Mains PYQs
UPSC Mains Chemistry paper 1 2022 questions
- Compare average and most probable values of position of an electron in the ground state of hydrogen atom. Explain with the help of drawing, why two values differ.
- Consider the following atomic orbitals of $A$ and $B$ atoms in a heterodiatomic $AB$ molecule.
| $A$ | $B$ |
|---|---|
| $2s$ | $2p_y$ |
| $2p_x$ | $2p_z$ |
Depict the nonbonding interactions among these atomic orbitals with reason.
- (i) $F$-centre defect can be introduced in several ways. Regardless of the method used, the colour produced in any particular crystal is always same. Explain the reasons.
(ii) How would the formation of $F$-centre affect the density of the crystal ?
- Calculate $\Delta G$ at 298 K for the formation of $\mathrm{O_3}$ from $\mathrm{O_2}$ in urban smog, where $[\mathrm{O_2}] = 0.21$ atm and $[\mathrm{O_3}] = 5\times10^{-7}$ atm.
Given; $\Delta G_f^\circ(\mathrm{O_3}) = 163\,\mathrm{kJ\,mol^{-1}}$,
$R = 8.314\,\mathrm{J\,mol^{-1}\,k^{-1}}$,
$F = 96485\,\mathrm{C\,mol^{-1}}$.
- For a cell reaction
$\mathrm{Cu^{2+}(aq) + Zn(s) \longrightarrow Cu(s) + Zn^{2+}(aq)}$
the standard electrode potential for $\mathrm{Zn/Zn^{2+}} = 0.339\,\mathrm{V}$ and for $\mathrm{Cu^{2+}/Cu} = 0.762\,\mathrm{V}$ at 25°C. Calculate standard change in free energy $\Delta G^\circ$ and equilibrium constant $K$ for the reaction.
$[R = 8.314\,\mathrm{J\,mol^{-1}\,k^{-1}}]$
- An automobile tyre contains air at $320\times10^3$ Pa at 20°C. The stem valve is removed and the air is allowed to expand adiabatically against a constant external pressure of $100\times10^3$ Pa until $P = P_{\mathrm{external}}$. For air, $C_{v,m} = 5/2\,R$. Calculate the final temperature of the gas in the tyre. Assume ideal gas behaviour.
- A particle is in the $n$th energy state, $\phi_n(x)$, of an infinite square well potential with width $L$ (box size from $O$ to $L$). Calculate the probability that the particle is confined to the first $1/a$ of the width of the well.
- In a certain material of simple cubic structure, (100) diffraction is obtained at $\theta = 14.88^\circ$ with radiation of $\lambda = 1.541$ Å. Can this material accommodate an atom of 1.08 Å radius interstitially in void space without lattice distortion ?
$[\sin 14.88 = 0.257]$
- Identify the least stable ion of the following ions and justify your answer.
$\mathrm{OCN^-}$ $\mathrm{ONC^-}$ $\mathrm{SCN^-}$
- A 74.6 g ice cube floats in the sea. The temperature and pressure of the system and surroundings are 0°C and 1 atm. Calculate $\Delta S_{\mathrm{syst}}$, $\Delta S_{\mathrm{surr}}$ and $\Delta S_{\mathrm{univ}}$ for the melting of ice cube. What can you conclude about the nature of process from the value of $\Delta S_{\mathrm{univ}}$ ? (The molar heat of fusion of water is 6.01 kJ/mol)
- [Figure] Graph of relative number of molecules against molecular speed, with Curve 1 (sharp peak at lower speed) and Curve 2 (broad, lower peak at higher speed).
The graph above shows the distribution of molecular speeds for Argon and Helium at the same temperature.
(i) Which curve, 1 or 2 better represents the behavior of Argon ?
(ii) Which curve represents the gas that effuses more slowly ?
(iii) Which curve more closely represents the behavior of fluorine gas ? Explain.
- Construct a phase-diagram for a one component system (water) and explain all the three curves. Also describe the significance of critical pressure, critical temperature and triple point.
- Provide briefly a qualitative account of different forces which influence the speed of an ion in solution of strong electrolyte moving under an externally applied electric field.
- By using the following given data, find that under what conditions is $\mathrm{H_2}$ in the state corresponding to $\mathrm{N_2}$ at 126 K and 1 atm ?
| Gas | $T_c$/K | $P_c$/atm |
|---|---|---|
| $\mathrm{H_2}$ | 33 | 13 |
| $\mathrm{N_2}$ | 126 | 39 |
- The vapour pressure of water at 363.2 K is 529 torr. Use the Clausius-Clapeyron equation to determine the average value of molar heat of vaporization, $\Delta\overline{H}$, of water between 363.2 K and 373.2 K. $[R = 8.314\,\mathrm{J\,mol^{-1}\,k^{-1}}]$
- Consider two liquids $A$ and $B$ such that $A$ has half of the surface tension and twice the density of $B$. If liquid $A$ rises to a height of 2.0 cm in a capillary, what will be the height to which liquid $B$ will rise in the same capillary.
- Write down the basic principle of polarography. With the help of a neat typical polarogram discuss the significance of halfwave potential, diffusion current and limiting current.
- Determine the percentage of ionic character (bond polarity) of BrCl and comment on the nature of Br–Cl bond.
(Dipole moment of $\mathrm{BrCl} = 1.42\times10^{-30}$ cm,
bond length, $d_{\mathrm{Br-Cl}} = 214\times10^{-14}$ m,
charge of an electron $= 1.6\times10^{-19}$ C)
- The rate Law for the reaction
$\mathrm{N_2O_2(g) \longrightarrow 2NO(g)}$
is of first order in the concentration of $\mathrm{N_2O_2}$. Derive an expression for the time-dependent behaviour of the product concentration $[\mathrm{NO}]$.
- Label each of the following processes with proper explanation in Jablonski diagram :
(A) Allowed absorption
(B) Fluorescence
(C) Phosphorescence
(D) Internal Conversion (IC)
(E) Inter System Crossing (ISC)
Discuss the mode of transition which is favourable for a photochemical reaction.
- What is allosteric effect ? Give example of an allosteric protein. Discuss homotropic allosteric modulators with examples.
- Write IUPAC nomenclature of $\mathrm{[Ni(CO)_4]}$ and $\mathrm{[Ni(CN)_4]^{4-}}$. Give structure and draw their shapes with explanation.
- Write the general synthetic procedure of lower cyclosiloxanes like cyclic dimethylsiloxane trimer $\mathrm{[(Me_2SiO)_3]}$. Draw its structure. Why $\mathrm{MeSiCl_3}$ is not used as starting material for its synthesis ?
- (i) Calculate the number of metal-metal bond in $\mathrm{Cp_2Fe_2(CO)_4}$.
(ii) Determine the structural type of the metal atom cluster, $\mathrm{Bi_5^{3+}}$.
- Why are $4f$ metal ions (lanthanide ions) generally pale in colour ? Why do they show line like electronic spectra ?
- Consider the above pairs of $\pi$-donor ligands :
[Figure] Two columns, (I) and (II): in each, a pentagonal ring ligand sits above another ring ligand (a square in (I), a hexagon in (II)), each ring drawn with an inner circle.
Identify the $d^6$ metal ions/atom among Co(O), Mn(I), Fe(II), and Fe(III), which form neutral mixed sandwich compound. Explain.
- (i) How $\mathrm{XeF_6}$ can be separated from a mixture of $\mathrm{XeF_2}$, $\mathrm{XeF_4}$ and $\mathrm{XeF_6}$ ?
(ii) Write the products with explanation
$\mathrm{B_2H_6 + 2NH_3 \longrightarrow\ ?}$
$\mathrm{B_2H_6 + 2Me_3N \longrightarrow\ ?}$
- Aqueous solution of $\mathrm{FeCl_3}$ is bright yellow and not pale-violet like other metal ions having high-spin $d^5$ configuration. Discuss the origin of the colour.
- Cite one example of an optically active tetracoordinated complex compound where the metal ion and donor atoms lie on a plane. Justify your answer.
- Consider aqueous solutions of $\mathrm{LaCl_3}$ (Lanthanum trichloride) and $\mathrm{LuCl_3}$ (Lutetium trichloride). Which solution shows lower pH ? Explain.
- The reaction cis-2-butene $\underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}}$ trans-2-butene is first order in both the direction. At 25°C, the equilibrium constant is 0.406 and the forward reaction rate constant is $4.21\times10^{-4}\,\mathrm{sec^{-1}}$. Starting with a sample of pure cis isomer with $[\mathrm{cis}]_0 = 0.115\,\mathrm{mol\,dm^{-3}}$, how long it will take to form half of equilibrium amount of the trans isomer from cis isomer ?
- At 0°C and 1 atm pressure, the volume of nitrogen gas required to cover a sample of an adsorbent is found to be $130\,\mathrm{cm^3\,g^{-1}}$. Calculate the surface area per gram of adsorbent. Given that area occupied by a nitrogen molecule is $0.162\,(\mathrm{nm})^2$.
$[N_A = 6.022\times10^{23}\,\mathrm{mol^{-1}}]$
- Compare and comment on the magnetic properties of the following complexes :
(i) $\mathrm{[Cu\,(OAc)_2]_2}$
(ii) $\mathrm{[Cu\,(CN)_4]^{3-}}$
- Which one is more stable between the two isomers ? Explain.
$\mathrm{[(H_3N)_5\,Cr - CN - Cr(CN)_5]}$
$\mathrm{[(H_3N)_5\,Cr - NC - Cr(CN)_5]}$
- Draw the active site structure of Hemocyanin (Hc) in deoxyhemocyanin and oxyhemocyanin forms, and write the colour of Hemocyanin in these two forms. Write the functions of Hemocyanin.
- Define stationary and non-stationary (branching) chain reaction. Non-stationary chain reactions always lead to explosion under certain conditions. Give a detailed account of these conditions.
- What is meant by steady-state approximation ? How this approximation helps in deriving the kinetics of following photochemical reaction ?
$\mathrm{H_2(g) + Cl_2(g) \longrightarrow 2HCl(g)}$
The quantum yield of this reaction is extremely large. Justify or criticize this statement.
- Derive Langmuir adsorption isotherm. How does Langmuir adsorption isotherm help in elucidation of kinetics of a gaseous reaction on solid surface ?