Mains PYQs
UPSC Mains Chemistry paper 2 2018 questions
- Draw the $\pi$-molecular orbital energy level diagram for the following :
(i) Benzene
(ii) Cyclobutadiene
(iii) Cyclopentadienyl anion
- How is NBS obtained from succinimide? Write its reaction with propene in presence of sunlight. Outline the mechanism.
- (i) Account for the fact that compound A is almost as strong an acid as $\mathrm{H_2SO_4}$ :
[Figure] A: cyclobutene ring bearing two C=O groups on one side and two OH groups on the C=C carbons on the other (squaric acid)
(ii) What happens when trans-2-butene is reacted with $\mathrm{CH_3COCl}$ in presence of anhydrous $\mathrm{AlCl_3}$?
- Which of the following known sigmatropic rearrangements would proceed readily and which slowly? Explain your answers :
(i) $\mathrm{CH_3{-}CH{=}CD_2 \longrightarrow CH_2{=}CH{-}CD_2H}$
(ii) [Figure] cycloheptatriene with H and D on the sp3 carbon $\longrightarrow$ cycloheptatriene with the H/H on the sp3 carbon and D on the ring carbon opposite it
- Explain the conditions for the following reaction, very briefly describe the steps involved and comment if the reaction is reversible :
[Figure] methyl vinyl ketone + ethene $\longrightarrow$ acetylcyclobutane
- By taking 1-methylcyclopentene as an example, explain hydroboration-oxidation reaction. Justify that it is stereoselective and regioselective.
- What do you mean by secondary structure of proteins? Explain $\alpha$-helix and $\beta$-pleated sheet structures of proteins.
- Outline the mechanism for the following reaction :
[Figure] $\mathrm{RCOOH}$ $\xrightarrow{\text{i) }\mathrm{LiAlH_4};\ \text{ii) }\mathrm{H_2O}}$ $\mathrm{RCH_2OH}$
In what way is $\mathrm{NaBH_4}$ different from $\mathrm{LiAlH_4}$ in 'chemoselectivity'?
- Give the synthetic schemes including reaction conditions for the preparation of the following polymers from their monomers :
(i) Nylon 66
(ii) Teflon
(iii) Terylene
- Carry out the following transformations :
(i) [Figure] indole $\longrightarrow$ 2-(2-hydroxyethyl)indole (indole with $\mathrm{CH_2CH_2OH}$ at C-2)
(ii) [Figure] 1-vinylcyclohexene $\longrightarrow$ bicyclic cyclopentanone fused to cyclohexane (hydrindanone, C=O on the five-membered ring next to the ring fusion)
- Answer the following briefly :
(i) How can you prepare 8-methylquinoline starting with o-toluidine as one of the starting materials?
(ii) With suitable example, comment whether Fries rearrangement proceeds intermolecularly or intramolecularly. Give evidence in favour of your answer.
- Write the mechanism of the following :
(i) [Figure] 3-benzylidenephthalide (CHPh on the lactone carbon) $\xrightarrow{\mathrm{PhMgBr}}$ $\xrightarrow[\Delta]{\mathrm{H_2SO_4}}$ 2,3-diphenylindenone
(ii) [Figure] pyrrole-2-carbaldehyde (N-H, CHO) $\xrightarrow[\Delta]{\mathrm{CH_2{=}CH{-}CH{=}PPh_3}}$
(iii) [Figure] bicyclic enone with OAc, angular $\mathrm{CH_3}$ and ketone $\xrightarrow{\text{1) }\mathrm{H_2SO_4\text{-}MeOH};\ \text{2) }\mathrm{H_3O^+}}$ decalin-dione with angular $\mathrm{CH_3}$
- Predict the product(s) with mechanism for the following :
(i) [Figure] (S)-type 1-phenylethyl chlorosulfite ($\mathrm{PhCH(CH_3)OSOCl}$ with H hashed) $\xrightarrow[\Delta]{\text{1,4-dioxane}}$
(ii) [Figure] decalin enone bearing a $\mathrm{CH_2OTs}$ group at the ring fusion $\xrightarrow[\text{Tetrahydrofuran}]{\text{1) Li/liq. }\mathrm{NH_3}}$ then 2) $\mathrm{H_3O^+}$
(iii) [Figure] naphthalene $\xrightarrow[\text{pentyl bromide chain, Br-terminated}]{\mathrm{Na}}$
- Which of the following conjugated dienes would not react with a dienophile in Diels-Alder reaction? Justify your answer :
(i) [Figure] 3-methylenecyclohexene (exocyclic $\mathrm{CH_2}$)
(ii) [Figure] 2,4-hexadiene (acyclic diene)
(iii) [Figure] 1,2-dimethylenecyclohexane
(iv) [Figure] bicyclic (octalin type) diene fused with a cyclohexene ring
(v) [Figure] 1-vinylcyclohexene
- The mass spectra of two different cycloalkanes both show a molecular ion peak at $m/z = 98$. One spectrum shows a base peak at $m/z = 69$ and the other shows a base peak at $m/z = 83$. Identify the two cycloalkanes.
- Maleic anhydride reacts rapidly with 1,3-butadiene, but does not react at all with ethene under thermal conditions. Explain.
- An organic compound (MF $\mathrm{C_5H_{10}O}$) exhibits the following spectral characteristics :
UV ($\lambda_{\max}$ : 280 nm)
IR $\nu_{\max}$ : $1715\,\mathrm{cm^{-1}}$
$^1$H NMR ($\delta$, ppm) : 0.90 (3H, t), 1.60 (2H, m), 2.20 (3H, s), 2.40 (2H, t)
Mass ($m/z$) : 86, 71, 58, 43 (100%)
Deduce the structure of the compound and explain the principal ions observed in the mass spectrum.
- Each of $\mathrm{PhCH_2COCH_2Cl}$ and $\mathrm{PhCHClCOCH_3}$ in reaction with NaOMe/MeOH furnishes the same product. What mechanistic implication can be drawn from the above fact?
- Two substitution products result from the reaction of 3-chloro-3-methyl-1-butene with sodium acetate ($\mathrm{CH_3COO^-Na^+}$) in acetic acid under $\mathrm{S_N1}$ conditions. Identify the products. Indicate the thermodynamic product and kinetic product.
- Distinguish between HDPE and LDPE with reference to their mode of production and physical properties. Mention any two applications for each.
- A signal has been reported to occur at 120 Hz downfield from TMS in an NMR spectrometer with a 60 MHz operating frequency.
(i) What is its chemical shift?
(ii) What would its chemical shift be in an instrument operating at 100 MHz?
(iii) How many hertz downfield from TMS would the signal be in a 100 MHz spectrometer?
- Distinguish between DNA and RNA with regard to their nucleotide structures, location in the cells and functions.
- When trans-4-tert-butylcyclohex-2-enol is reacted separately with mCPBA and V(acac)$_2$/tert-butylhydroperoxide, in the second reaction only one product is formed, whereas in the first case a mixture of two isomeric products is obtained. Write the structure of the product in each case with proper stereochemical outcome and justification.
- Write the product(s) with proper stereochemical outcome of acetolysis of each of threo- and erythro-3-phenyl-2-butyltosylate giving the reaction pathway in each case.
- Explain what inferences about the type of reaction and stereochemistry can be gained from the observation that when each of A and B undergoes reaction with KOH in methanol the rate of reaction is very slow for A compared with that of B :
[Figure] A and B: two chair-form hexachlorocyclohexane stereoisomers with Cl substituents (axial/equatorial arrangement as drawn)
- Arrange the following compounds in order of their decreasing reaction rate of substitution with aqueous formic acid and justify your answer :
[Figure] 1-bromo-1-methylcyclohexane; 1-bromo-1,2,3,4-tetrahydronaphthalene; $\mathrm{Ph_2CH{-}Br}$; $\mathrm{(CH_3)_2CHCH_2CH_2Br}$
- Classify the following examples as aromatic, anti-aromatic or non-aromatic. Write their structures also :
(i) Tetrahydrofuran
(ii) Cyclooctatrienyl dianion
(iii) Azulene
(iv) Tropolone
- Write the structures of the products expected from hydroxylation of maleic acid and fumaric acid using $\mathrm{OsO_4}$/Py, with the stereochemistry. What is the role of pyridine in the above reaction?
- What is Birch reduction? Suggest its mechanism by taking a suitable example. Why does Birch reduction on benzene derivatives with an electron-donating group happen on ortho and meta positions?
- Explain the mechanism of free radical chain polymerization of vinyl chloride using benzoyl peroxide as an initiator.
- Distinguish between fluorescence emission and phosphorescence emission giving suitable examples.
- The direct irradiation of either cis- or trans-stilbene at 313 nm results in the formation of a mixture of 93% cis- and 7% trans-olefin, no matter how long, within reason, the irradiation is continued. Give a suitable explanation for that.
- Classify the following reaction and propose a suitable mechanism for it :
[Figure] bicyclic ketone (cyclodecanone-type, C=O bridging two six-membered rings) $\xrightarrow{h\nu}$ cis-decalin-type tertiary alcohol (OH at ring fusion carbon, H at the other ring fusion)
- How do the UV spectral data $\lambda_{\max}$ 296 nm, $\varepsilon_{\max}$ 10700 and $\lambda_{\max}$ 281 nm, $\varepsilon_{\max}$ 20800 help in deciding between structures X and Y ?
[Figure] X: 2,6,6-trimethylcyclohexenyl-CH=CH-CO-CH3 (ionone type, gem-dimethyl and methyl on ring); Y: cyclohexenyl-CH=CH-CO-CH3
- Explain charge-transfer spectra by taking a suitable donor-acceptor type complex.