Mains PYQs
UPSC IFoS Mains Chemical Engineering paper 1 2017 questions
- State Fourier's law of heat conduction and derive the dimension of thermal conductivity from the equation.
- Define a Black Body. State Stefan-Boltzmann's law and Kirchhoff's law of radiation.
- Give the importance of relative volatility for distillation purpose and derive its relationship with equilibrium composition (x, y) in a mixture.
- Write and explain the dimensionless group in mass transfer that is equivalent to Prandtl number in heat transfer.
- Define the following terms :
(i) Moisture content
(ii) Equilibrium moisture
(iii) Bound moisture
(iv) Free moisture
(v) Humidity
- Determine the equivalent diameter for heat transfer for a fluid flowing through an annulus of inner dia. 0·8 m and outer dia. 1·0 m.
- Write the limitations of venturimeter over orifice meter and discuss the principle of orifice meter.
- State Rittinger's law, Kick's law and Bond's law of Crushing.
- Explain the working of a ball mill giving the expression for the critical speed of ball mill.
- A simple U-tube manometer is installed across an orifice meter. The manometer is filled with mercury (sp. gr. = 13·6) and the liquid above the mercury is water. The manometer reads 200 mm. What is the pressure difference over the manometer in $\mathrm{N/m^2}$ ?
- Water is flowing through a steel pipe of 0·0525 m ID with an average linear velocity of 1·524 m/sec. The average bulk temperature of water is $37{\cdot}8^\circ\mathrm{C}$.
(i) Determine whether the flow is turbulent or laminar.
(ii) Calculate the water-film coefficient.
Data : [$\mu$ of water at $37{\cdot}8^\circ\mathrm{C}$ = 0·684 cP
k of water at $37{\cdot}8^\circ\mathrm{C}$ = 0·628 $\mathrm{J/s\text{-}m^2\,({}^\circ K/m)}$
$c_p$ of water at $37{\cdot}8^\circ\mathrm{C}$ = 4187 $\mathrm{J/kg\text{-}{}^\circ K}$
- Clearly distinguish between particulate fluidization and aggregative fluidization.
- Explain about optimum reflux ratio in distillation column.
- Fuel oil in a tank is to be heated from $15{\cdot}5^\circ\mathrm{C}$ to $43^\circ\mathrm{C}$ by means of a steam coil. The steam temperature is $100^\circ\mathrm{C}$. The film heat transfer coefficient for fuel oil is $15{\cdot}7\,\mathrm{kcal/hr\,m^2\,{}^\circ C}$ and heat transfer coefficient for steam is $3500\,\mathrm{kcal/hr\,m^2\,{}^\circ C}$. The fouling factors are $4\,\mathrm{kcal/hr\,m^2\,{}^\circ C}$ and $7\,\mathrm{kcal/hr\,m^2\,{}^\circ C}$ for oily steam and for fuel oil respectively. The coil is required to heat 2250 kg/hr of fuel oil of specific heat $0{\cdot}8\,\mathrm{kcal/kg\,{}^\circ C}$. The inside diameter of pipe is 4·1 cm and outside diameter is 4·83 cm. Calculate the
(i) overall coefficient of heat transfer, and
(ii) heat transfer surface area.
- It is desired to absorb acetone from a dilute solution of acetone in air containing 1 mole % acetone by contacting it countercurrently with pure water in an absorber consisting of two theoretical stages. The total inlet gas flow rate is 30 kmol/hr and that of water is 90 kmol/hr. Under the operating conditions; the equilibrium relationship for acetone in gas-liquid is $y = 2x$. Estimate the mole fraction of acetone in the water stream leaving the absorber.
- Explain the working of a centrifugal pump and a positive-displacement pump.
- List the characteristics of a good solvent for absorption column explaining the reasons.
- Mention the advantages of membrane separation processes over the conventional processes.
- Define Molecular Weight Cut-Off (MWCO) method for characterization of ultrafiltration membranes.
- Discuss the different types of heads used as end closures of cylindrical vessels.
- Mention the different types of steel and non-ferrous materials along with their basic characteristics, used in construction of process vessels.
- Define the 'Time-Constant' and discuss its effect on response of the system.
- Distinguish clearly between 'non-interacting' and 'interacting' systems in control theory.
- What are the desired characteristics of a measuring instrument used in industry ?
- Define the term 'Stability' of a control system. Also write the merits and demerits of the Routh-Hurwitz criteria.
- Discuss the different types of storage tanks used for storing volatile liquids. Elaborate the steps and procedure for the design of storage tanks.
- The characteristic equation of a closed loop system using a proportional controller with gain $K_c$ is
$$12S^3 + 19S^2 + 8S + 1 + K_c = 0.$$
Find the value of controller's gain $K_c$ at the onset of stability.
- Describe the membrane distillation process carried out for deionization of water in the semiconductor industry.
- A P-I-D controller output p(t) is given by
$$p(t) = 30 + 5e(t) + 1{\cdot}25\int_0^t e(t)\,dt + 15\frac{de(t)}{dt},$$
where e(t) is error at time t.
Determine the transfer function of the controller.
- A cylindrical pressure vessel of volume $6\pi\,\mathrm{m^3}$ has to be designed to withstand a maximum internal pressure of 10 atm. The allowable design stress of the material is $125\,\mathrm{N/mm^2}$ and corrosion allowance is 2 mm. Determine the thickness of the vessel for a length/diameter ratio of 3·0.
- Explain the electrodialysis process used in desalination and conservation of sea and brackish water and industrial waters.
- Develop the transfer function for a second order system and discuss the characteristics of an underdamped system.
- Explain the basic principle of Ultrafiltration giving its advantages.
- Discuss in detail, the design of bracket supports.