Mains PYQs
UPSC IFoS Mains Agri Engg paper 1 2018 questions
- What are the different types of runoff ? Explain the factors that affect the runoff in a watershed.
- What do you understand by biological or vegetative measures in a watershed ? Describe the measures.
- What is integrated watershed management approach ? Explain its different objectives.
- Define hydrological drought. Write its components and their possible effects. List the measures that can be adopted to lessen the effects of drought in a region.
- Define remote sensing. What are the different stages in remote sensing data acquisition and processing ? Diagram showing remote sensing system for resource management from source to end use may be given.
- What is GIS ? Name the applications of remote sensing and GIS in land and water management. Briefly discuss any three applications.
- Discuss the Rational method of predicting design peak runoff rate.
In a watershed the most remote point is 600 m away from the outlet point. The outlet point is 3.0 m below the most remote point. Calculate the time of concentration of watershed.
- Explain a procedure for checking rainfall data of a station for consistency.
- What is contour trench ? Write about different types of contour trenches. Explain design procedure of contour trench systems.
- The ordinates of the 2-h unit hydrograph of a watershed are given below :
| Time, h | 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2-h UH ordinates, $\mathrm{m^3/s}$ | 0 | 20 | 90 | 150 | 180 | 160 | 100 | 60 | 25 | 15 | 5 | 0 |
Determine the ordinates of S-curve hydrograph and using S-curve determine the ordinates of the 4-h unit hydrograph of watershed.
- What are the factors which affect soil erosion by water ? Discuss. If the degree of slope is increased 4 times, what will be the relative increase in erosion caused by water ?
- Define flood routing. Discuss the basic elements of flood routing.
- Discuss design procedure of permanent soil conservation structures.
- Describe the classification of bench terraces given by Rama Rao and Bali, with suitable sketches.
- What are the factors affecting land grading ? How is survey carried out for land grading ? Discuss commonly used methods for calculation of earth work.
- Discuss in brief the utility of farm ponds. What are the different types of ponds depending upon the source of water and their location with respect to land surface ? Write the criteria for selection of site of farm ponds.
- What are the different types of soil movement due to wind erosion ? Describe how the movements of the particles of various sizes take place in different types of movement.
- What are the different sources of irrigation in India ? List different factors influencing planning and development of minor irrigation projects. What are the positive and negative impacts of irrigation on the ecosystem and environment ?
- Differentiate between the following :
(i) Specific capacity of well and Specific yield of aquifer
(ii) Open wells and Tubewells
(iii) Pumping test and Recuperation test of a well
(iv) Confined and Unconfined aquifers
- Discuss various factors influencing irrigation water requirement. How can you estimate total irrigation water requirement incorporating different components for a given field and crop ?
- The soil moisture at Field Capacity (FC) is 25% (W/W) and the moisture content at the time of irrigating is 15% (W/W). The apparent specific gravity is 1.52 and depth of soil to be wetted is 90 cm. How much water in ha-cm per hectare must be applied ?
- What is Parshall flume ? Explain the working procedure of Parshall flume. How is it different from cut-throat flume ?
- Explain the concept of conjunctive use of surface and groundwater in canal command areas for efficient water use. What are the advantages and limitations of conjunctive use ?
- What is the importance of drainage network in canal command and large irrigation projects ? List all the information required for design and installation of subsurface drainage systems.
- A field of wheat crop of size $200 \times 100$ m with water source located at the lower left corner in the field is to be irrigated using sprinkler irrigation system. The prevailing land slope is south to north. Draw a layout of sprinkler mainline and lateral lines with brief explanation.
- It is very important for a farmstead to be properly arranged. List and explain in brief, the factors to be considered for best arrangement of farmstead.
- List different soil water coefficients. Explain the methodology to estimate maximum available soil water using these coefficients.
- A tubewell is established in an artesian aquifer. Find its yield in litres per hour for a drawdown of 3 m when the diameter of the well is 20 cm and the thickness of the aquifer is 30 m. Assume the coefficient of permeability to be 35 m/day. If the diameter of the well is doubled, find the increase in the yield, the other conditions remaining the same. Assume the radius of influence as 300 m in both cases.
- What is crop coefficient and how is it estimated using crop evapotranspiration and reference evapotranspiration ? Explain briefly the factors influencing crop coefficient.
- Irrigation scheduling involves determining "when to irrigate" and "how much to irrigate". Explain the factors to be considered in developing irrigation schedule, with an example.
- What are the main components of Polyhouse ? Discuss various factors influencing the design and installation of Polyhouses in India for surface covered cultivation.
- What are the priorities given to environmental issues in irrigated commands ? Considering a holistic view of irrigated agriculture and socio-economic constraints, explain the issues in brief.
- In an exercise to develop design and operations plan for surface irrigation in wheat crop, an infiltration test was carried out. The following data were obtained from the test :
| Time from starting (min) | 0 | 1 | 2 | 5 | 10 | 20 | 30 | 60 | 90 | 120 |
|---|---|---|---|---|---|---|---|---|---|---|
| Depth of water level from reference (mm) | 0 | 3 | 5 | 9 | 14 | 18 | 20 | 24 | 28 | 32 |
Plot the infiltration rate vs time and find out basic infiltration rate.
- What are the different methods for fertilizer injection (fertigation) ? The location of fertigation systems is very important in drip irrigation systems. Discuss in brief.