Topper Copies

Show that the length of an endless chain which will hang over a circular pulley of radius a so as to be in contact with two thirds of the circumference of the pulley is $$a\left\{\frac{3}{\log(2+\sqrt{3})}+\frac{4\pi}{3}\right\}$$

Tarun Kumar Yadav, AIR 49, 2025

Since chain is in contact with 2/3rd of circumference :

length of chain over pulley (contact) $= \frac{4\pi}{3}a$

finding length of hanging chain

we need to determine AEB

Construct the diagram $\longrightarrow$ for a common catenary hanging under its weight from points A & B

[a pulley with centre O, the arc of contact marked $4\pi/3$, chord AB meeting the vertical through O at D, a catenary hanging from A and B to its lowest point E, tangents at A and B with angle $\pi/3$ at B]

its standard eq$^n$ are

$y = c \sec\psi$

and $s = c\tan\psi$

and $x = c\log|\sec\psi + \tan\psi|$

where $\psi \to$ angle with horizontal

$c \to$ constant of catenary

$y, s \to$ height above catenary axis & length of chain

then angle at B $= \pi/3$

thus $DB = \frac{a\sqrt{3}}{2} = c\log(2+\sqrt{3})$

or

then $EB = c\tan\psi = c\sqrt{3}$

length $AEB = 2\cdot EB = \dfrac{3a}{\log(2+\sqrt{3})}$

thus total length $= \dfrac{4\pi}{3}a + \dfrac{3a}{\log(2+\sqrt{3})}$

length $= a\left\{\dfrac{3}{\log(2+\sqrt{3})} + \dfrac{4\pi}{3}\right\}$